Forum Replies Created
-
Posts
-
Re: AEG Favorit 44450 911615013/01
always “favorit” to look for dry joints on the heater relay on the pcb. EMW can very often sort out no heat problems on dishwasher modules
Re: amica repairs
try this http://www.amica-international.co.uk/ssr
my rep gave me a leaflet with this contact, i have been thinking about it myself but have been to busy to think about it. let me know how you get on.
Re: hoover oph714d/1-80
tried to look up on gias but i cant see that exact model, the nearest i can find is OPH714D/2-80 or OPH714DS1-80.
49015449 fits OPH714D/1 but dosnt show the -80 not sure if this matters.
different part numbers for those others shown above, the one with ds in the model needs a date code as there are three different ones.
Re: Creda Cordialle Electric Oven, oven not coming on
yes you are going to have to set the time for the oven to manually. without the buttons or model number you may have to something plastic to put in the holes like the stick part of cotton buds or the ink tube from a ball point pen.
Hope this helps.
Re: Connect Guarantee
i do the same as DrDill said, order a replacement and send the old one back with that yellow label as faulty.
i only ever do it on genuine cases and if i make a mistake with a wrong part i would keep it. i give a six months guarantee on parts and labour, always have done and i dont want to give suppliers or manufacturers the idea that they can get away with making crap parts and they dont have to back it up. i told the rep this, and said if you dont allow it i will go elsewhere for my spares, i dont think he is going to to loss a £4000 a month account just over the odd return, if it goes wrong within 6 months, which is rare.Re: LG displaying LE error..
This could be the part number you are looking for. i have changed a couple in the past, never changed the complete stator.
6501KW2001A
connect have it stock into me at £17.51. (but we know what there pricing is like so your price will probably be different ) :rolls:
as far as i can remember you have to remove the stator to fit it but it just push fits on, easy job.Re: whirlpool dishwasher pulsing
JOB DONE 😀
Fitted new module. all ok.think you must be fitting the wrong module spanner.
cheers.
Re: whirlpool dishwasher pulsing
the service number is the same, we have ordered part number 481221838364, which should be the correct programmed board. we have not been to fit yet but we will keep you updated with the outcome.
Re: whirlpool dishwasher pulsing
customer only just agreed to repair. just ordered new module. will keep you posted. you have got me worried now.
Re: PIMP MY LINK
http://www.clarkeselectrical.com
Thanks to anyone that takes the time to have a look around our site.
I have put it together myself and any ideas to improve it would be good.Re: hvr nextra dishwasher
just bringing this post back to the top of the list. has anyone got any ideas?
Re: bosch tumble dryer
the door lock checks out ok. the interior light does stay on with the door opened and closed (which should go off when the door shuts). i think its going to have to be a board fault but i want to be sure
Re: miele g646sc no heat.
heater and stats check out ok, relay coil has circuit, contacts look a bit black but ok i think.
Re: low water pressure d/w
cheers Don i guess the introduction of flow meters is better than just relying on time.
bosch is the make that the customer wanted so good news.
