cab

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 423 total)
  • Author
    Posts
  • cab
    Participant

    Re: AEG OKO Favorit 50700 dishwasher leaking from breather h

    havent worked for electrolux for a while but seem to remember there was no sollution, we used to try to place the hose in a postion that the end was in the air, create a `u` in the hose,

    cab

    in reply to: Fisher & Paykel DD605HSS #238968
    cab
    Participant

    Re: Fisher & Paykel DD605HSS

    Hi Chris I also have a hard copy service manual thats probaly 5 year old. Is your info more recent? if so can I have a copy also.

    thanks

    cab

    in reply to: ZWF1440 #239150
    cab
    Participant

    Re: ZWF1440

    posibly the only difference is the pulley bolt. on the newer machines they fit a counter sunk allen screw that is loctited in, it can be difficult to remove, this is one of the reasons I strip on first visit, if the bolt head rounds it means replacing the drum, tub back and pulley.

    cab

    in reply to: ZWF1440 #239148
    cab
    Participant

    Re: ZWF1440

    hi it takes me about 20 mins to strip down to investigate, tub out and split, depends how bad bearings are if they are seized on drum shaft etc. I normally strip on the first visit, if it needs extra parts ordering to come back etc. If you have never done one before it will take you a lot longer. I can strip and replace drum and tub back in around 50 mins, thats if I have parts with me! if you need any advice email me.

    cab

    in reply to: Zanussi ZWF1631w #238953
    cab
    Participant

    Re: Zanussi ZWF1631w

    you have mail

    cab

    in reply to: Beko WMA1715S Pre wash light flashes #238950
    cab
    Participant

    Re: Beko WMA1715S Pre wash light flashes

    If prewash light is lit I think this means child lock on!

    cab 😕

    in reply to: AEG(Zanussi style) Washer Dryer – Model L16810 #235714
    cab
    Participant

    Re: AEG(Zanussi style) Washer Dryer – Model L16810

    you have a pm

    cab

    in reply to: AEG D/W #235195
    cab
    Participant

    Re: AEG D/W

    LOADSA DIFFERENT VERSIONS WHATS THE PNC NO.

    CAB

    in reply to: HD lcd tv #234112
    cab
    Participant

    Re: HD lcd tv

    Not here either. but if you want to know anything about audio visual, its the dogs!!!!!

    cab

    in reply to: HD lcd tv #234110
    cab
    Participant

    Re: HD lcd tv

    try <a href="http://www.avforums.com

    cab” target=”_blank” rel=”nofollow”>http://www.avforums.com

    cab

    in reply to: L G washer dryer #233666
    cab
    Participant

    Re: L G washer dryer

    yep it does a rinse and spin before doing the dry. I think if when you program the machine you have to cancel the spin, it doesnt tell you in the instruction book.

    cab

    in reply to: Zanussi Dishwaher Mod DW980 #233671
    cab
    Participant

    Re: Zanussi Dishwaher Mod DW980

    Cant find a 980 is it a 908. Is it filling with enough water, if it is a 908 the blue syphon tubes are favorite.

    cab

    in reply to: Tricity Bendix Tumble Dryer TM310W Water Tank Full Light on #233507
    cab
    Participant

    Re: Tricity Bendix Tumble Dryer TM310W Water Tank Full Light

    Float sometimes gets distorted and sticks

    cab

    in reply to: Zanussi TLE 1116W (toploader) #233387
    cab
    Participant

    Re: Zanussi TLE 1116W (toploader)

    you have mail

    cab

    in reply to: zan over fill #233411
    cab
    Participant

    Re: zan over fill

    hi I have had one recently that would over fill then drain. All it was was a wire off the element. The fault code said it could be down to earth also!

    cab

Viewing 15 posts - 121 through 135 (of 423 total)