Forum Replies Created
-
Posts
-
Re: AEG LAVAMAT WATERDISTRIBUTER
have had a look at the sequence chart it would appear that it does fill through prewash then it senses the load before filling through the correct channel. thanks
cab
Re: AEG LAVAMAT WATERDISTRIBUTER
thanks the two plugs seemed like they can only go one way, because of the shrouds they fit into, there is a 4 wire and a two wire, the position on the new motor are in a different place, I havent done one of these in donkeys, didnt know if it only filled through the prewash first on all progs, didnt have a load to put into it and it didnt take a deal of water in, didnt know if it would take water through wash if a load was in absorbing the water.
cab
Re: LG Washing Machines
the intello wash system senses the load more, when you put it on the drum tumbles and the leds light in sequence as it senses, before taking in water, these are more prone to the problems I described.
cab
Re: LG Washing Machines
unbalanced load. all LGs do this. depending on which prog is set it will stick at different times. the cottons sticks at 12mins. They are supposed to throw up a fault code UE but they dont. I have changed modules and motors to try to rectify this problem without success, the fuzzy logic turns the drum one way then the other thats why the customer thinks its still washing, because it is a larger capacity drum if an old couple have one they wash little and hence it sticking. question the customer I bet she had a small load in at the time.
cab
Re: Zanussi TCE7276w
I have fitted the diffuser and it still didnt work had to order another, couldnt see anything wrong with it but there are old posts on this.
cab
Re: Haier D/w DW12
I have hade them leak passed the door seal into the door switch.
only a small leak but enough to short.
cabRe: Samsung SRS2028CSS melted black stuff in fridge with pic
yep me too, the one I had blocked the defrost channel hole, got it written off. It looks like the element is too close to the pipework and the stuff that melts is the pipework insulation.
cab
Re: lux fault code E41
generally this is the code if the machine has been started with the door open.
cab
Re: hob burning
fit them into granite worktops! most people with solid hotplate hobs are on a budget, and therefore most worktops are cheap and cant withstand high temps.
cab
Re: fisher +paykel
have you had the drawers out, if so are they all the way back on the runners till they click?
cab
