chalky

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 63 total)
  • Author
    Posts
  • in reply to: Its Official Then #304532
    chalky
    Participant

    Re: Its Official Then

    Humm I’ve never agreed with timers on cookers 😯
    I don’t know anyone that uses them (except 1 customer) but that’s not the point.

    in reply to: Bosch SGS53A12GB/01 Not emptying #304427
    chalky
    Participant

    Re: Bosch SGS53A12GB/01 Not emptying

    if its not heating it could have been washing for a very long time waiting to heat the water up this may make it leak through a perished seal, there may also be a problem with the fill matrix as these tend to get clogged up.
    i think you probably need to call a engineer out it shouldent be to expensive tho

    HTH

    in reply to: Bosch SGS53A12GB/01 Not emptying #304425
    chalky
    Participant

    Re: Bosch SGS53A12GB/01 Not emptying

    humm sounds like it could be a fault with the timer there prone to heating faults but that would not make it leak though 😕
    has it ever leaked before?

    in reply to: Bosch SGS53A12GB/01 Not emptying #304422
    chalky
    Participant

    Re: Bosch SGS53A12GB/01 Not emptying

    does it empty if you reset it?

    in reply to: scrappage scheme …..for white goods…!!!! #294881
    chalky
    Participant

    Re: scrappage scheme …..for white goods…!!!!

    at least we would all be busy after the warranty was up! 😆

    in reply to: Oldest customer ? #294938
    chalky
    Participant

    Re: Oldest customer ?

    i have a customer that’s 102!! and two weeks ago she kicked/pushed her indisit t/d out the back door!! (she did cut herself quit badly though)

    in reply to: Beko Door seal rubbing #294661
    chalky
    Participant

    Re: Beko Door seal rubbing

    if it’s a metal scraping sound I’m pretty sure they have an issue with the heater element bracket breaking.

    in reply to: bosch sgs43a12gb/42 #294610
    chalky
    Participant

    Re: bosch sgs43a12gb/42

    did both problems start at the same time tho?

    in reply to: Fix Zone #294539
    chalky
    Participant

    Re: Fix Zone

    have u tried http://www.sbsystems.co.uk/jobtracker.htm its only £65 and ok if u are a one man band, fix zones complete engineer is £750 if memory serves 😯

    in reply to: Hoover fault EO3 #294554
    chalky
    Participant

    Re: Hoover fault EO3

    my moneys on a coin stuck one of the pump pipes flipping round

    in reply to: bosch sgs43a12gb/42 #294608
    chalky
    Participant

    Re: bosch sgs43a12gb/42

    have you checked the spray arms are not blocked?

    in reply to: bosch dishwasher not filling…..SGS43A12GB/27 #294455
    chalky
    Participant

    Re: bosch dishwasher not filling…..SGS43A12GB/27

    I’d recommend getting someone out for this as it is likely you will also need the float chamber p/stat cleaned out as well 🙁

    in reply to: Advice on best Integrated Dishwasher please #294604
    chalky
    Participant

    Re: Advice on best Integrated Dishwasher please

    I’d say a upper range Neff its basically a Bosch.

    HTH 😀

    in reply to: servis module #294588
    chalky
    Participant

    Re: servis module

    Tried Tony @ EMW?

    in reply to: BSH induction hob eh777501e/04 #294224
    chalky
    Participant

    Re: BSH induction hob eh777501e/04

    cheers for that, 😳 thought it would be an ‘E’ tho? :rolls: that being the case it’s coming up e0 (if memory serves, she’s on her hols at the mo) on the right hand side, would it still be the left pcb? as know the control goes through the left 😕

Viewing 15 posts - 31 through 45 (of 63 total)