chalky

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 63 total)
  • Author
    Posts
  • in reply to: work dead #372377
    chalky
    Participant

    Re: work dead

    I normally get quiet at the end of the month.
    I think it has to do when people get paid, should pick up next week. 🙂

    and with the tory ( 👿 ) budget I think we may start getting more work in as more feel the squeeze.

    in reply to: 1.5uf capacitor #324181
    chalky
    Participant

    Re: 1.5uf capacitor

    Theirs a 2uF available from connect etc should be ok as they can have a tolerance 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}

    Dominic

    in reply to: Zanussi Main oven no heat but some on boost setting #324033
    chalky
    Participant

    Re: Zanussi Main oven no heat but some on boost setting

    Unfortunately I cant give you any advice on how to replace it but there is a link <—- (repairs@).

    If you where to phone me I would quote £49 labour and about £25 for the part depending on which element was required (if it is the element).

    Try and go with a genuine element they do cost a bit more but some (not all) pattern elements are very unreliable.

    HTH

    Dominic

    in reply to: Delonghi CDF 603 thermostat tripping RCD #323692
    chalky
    Participant

    Re: Delonghi CDF 603 thermostat tripping RCD

    Sounds like it could be moisture in the element, you would have to have the element checked with a megger.

    in reply to: Zanussi Main oven no heat but some on boost setting #324031
    chalky
    Participant

    Re: Zanussi Main oven no heat but some on boost setting

    I think (if memory serves me right) on boost the conventional oven elements come on to speed pre heat up.
    So it’s possible it could be the main fan oven element.

    Dominic

    in reply to: AEG Favorit 50730 #323727
    chalky
    Participant

    Re: AEG Favorit 50730

    dry joint on relay? 😕

    in reply to: Hotpoint Aquarius wf000 not spinning #323360
    chalky
    Participant

    Re: Hotpoint Aquarius wf000 not spinning

    Not enough details really but if the brushes are ok, theirs no earth leak, the machine can drain & theirs no bad connections anywhere it looks like it could be the module as there notoriously unreliable.

    HTH

    in reply to: Anyone know this company CSM Bolton #307116
    chalky
    Participant

    Re: Anyone know this company CSM Bolton

    Received cheque this morning 😀
    Persistent phone calls paid off 😆

    in reply to: Miele CVA620 coffee machine fault #322919
    chalky
    Participant

    Re: Miele CVA620 coffee machine fault

    you will probably find that it’s made by saeco/gaggia. There is a steam valve that used to be prone to leaking.
    give sgs a call for parts i’ve found them quite reasonable 😀
    08458621856

    in reply to: Commercial #322881
    chalky
    Participant

    Re: Commercial

    put a sluice washer in, that shouldn’t block up 😆

    in reply to: Anyone know this company CSM Bolton #307113
    chalky
    Participant

    Re: Anyone know this company CSM Bolton

    any news on this thread as i’m awaiting payment since the end of 09 😯
    it was apparently on behalf of a large supermarket in the area that was buying up property.
    ‘the cheques in the post’ :rolls:

    in reply to: Indesit £74.95 #320741
    chalky
    Participant

    Re: Indesit £74.95

    😳 indesit service £74.98 inclusive of call out, labour & parts 👿 😈

    in reply to: Condensation in back of van #311556
    chalky
    Participant

    Re: Condensation in back of van

    how about putting a de-humidifier on an extension lead overnight? (or an inverter 😆 )
    if its got a proper air con unit wont that dry the air?

    in reply to: What’s happend to the specialist? #305009
    chalky
    Participant

    Re: What’s happend to the specialist?

    or the enamelled inner drum!!!

    in reply to: What’s happend to the specialist? #305007
    chalky
    Participant

    Re: What’s happend to the specialist?

    I used 2 love the old hoover electron 1100, good old day’s (in some ways) remember keymatic’s?

    candy = 🙁

Viewing 15 posts - 16 through 30 (of 63 total)