char14lew

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 116 total)
1 2 3 4 5 6 7 8
  • Author
    Posts
  • February 5, 2017 at 9:59 pm in reply to: Fisher & Paykel RF610A f26 #445026
    char14lew
    Participant

    Re: Fisher & Paykel RF610A f26

    thanks, I’ve already repaired the defrost heater f20 wire that is in the lefrt hinge!

    December 23, 2016 at 10:46 pm in reply to: Another nightmare WMXTF! #443984
    char14lew
    Participant

    Re: Another nightmare WMXTF!

    I assumed the warranty is only for one year, I did advise them to contact hotpoint and see what they could offer, likely a plan for £100 that would provide the repair and a further years warranty as I suspect its the main board.
    The model is a WMXTF942 Martin!

    December 22, 2016 at 7:39 pm in reply to: QUALTEX #443775
    char14lew
    Participant

    Re: QUALTEX

    Oakwood domestic appliance services

    December 17, 2016 at 5:55 pm in reply to: PAT tester damages Siemens dishwasher module? #443820
    char14lew
    Participant

    Re: PAT tester damages Siemens dishwasher module?

    I was told during my course at Dixon training never to insulation test electronically controlled appliances via the plug due to the 500v causing damage to the electronics- but to insulation test the components individually?
    The tutors had 70yrs experience between them so there must be something in it!

    December 15, 2016 at 8:53 pm in reply to: bosch WFO2860 stops with 5mins left on spin #443800
    char14lew
    Participant

    Re: bosch WFO2860 stops with 5mins left on spin

    thanks Martin

    December 12, 2016 at 9:38 am in reply to: Hotpoint WMD960 Leaking #443485
    char14lew
    Participant

    Re: Hotpoint WMD960 Leaking

    thanks for replies guys – will grime build up be the reason it hasn’t leaked from new then. If that’s the case, should it not be curable with a good clean?
    cheers

    December 8, 2016 at 9:54 am in reply to: Russel Hobbs RHWM81400DIDB H6 error code #443372
    char14lew
    Participant

    Re: Russel Hobbs RHWM81400DIDB H6 error code

    thanks Steve

    December 7, 2016 at 7:04 am in reply to: DRTS engineering Ltd #443340
    char14lew
    Participant

    Re: DRTS engineering Ltd

    that’s good to know’ cheers Simon

    December 5, 2016 at 9:53 pm in reply to: ceramic hob stays warm when off #443337
    char14lew
    Participant

    Re: ceramic hob stays warm when off

    thanks Dave

    November 19, 2016 at 4:34 pm in reply to: Hotpoint WMXTF742P tripping #442621
    char14lew
    Participant

    Re: Hotpoint WMXTF742P tripping

    I checked it for resistance and insulation, before and after live testing. If it’s the heater, how is it not tripping when live testing?
    I won’t be going back to this one,but will try changing the heature in future regardless!
    thanks

    November 16, 2016 at 4:05 pm in reply to: Hotpoint WMXTF742P tripping #442618
    char14lew
    Participant

    Re: Hotpoint WMXTF742P tripping

    what if there was a short between live and neutral at the board?

    November 12, 2016 at 5:11 pm in reply to: Hotpoint WMXTF742P tripping #442616
    char14lew
    Participant

    Re: Hotpoint WMXTF742P tripping

    thanks for replies guys!
    went back to this,checked socket, changed mains lead and surpressor- still tripping.
    live tested heater,not tripping electrics- insulation tested straight after-ok.
    live tested drain pump just to rule that out also. Has to be mains board surely?

    October 13, 2016 at 8:18 pm in reply to: rangemaster RDW6012FI/SF E6 #441092
    char14lew
    Participant

    Re: rangemaster RDW6012FI/SF E6

    There must still have been moisture on a connection as I went back a week later when it had fully dried out and the E6 fault code had cleared and machine was working again!

    October 13, 2016 at 8:15 pm in reply to: beko TFF673APS freezer #441587
    char14lew
    Participant

    Re: beko TFF673APS freezer

    It was out of Gas!

    October 13, 2016 at 8:14 pm in reply to: Samsung RSH7UNBP no water #441460
    char14lew
    Participant

    Re: Samsung RSH7UNBP no water

    water dispenser lever was broken at the end so wasn’t making contact with the micro switch, hence wasn’t opening the valve!

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 116 total)
1 2 3 4 5 6 7 8