clockworkone

Forum Replies Created

Viewing 15 posts - 481 through 495 (of 555 total)
1 2 3 … 32 33 34 35 36 37
  • Author
    Posts
  • March 29, 2011 at 6:10 pm in reply to: hot fill w/machines #348127
    clockworkone
    Participant

    Re: hot fill w/machines

    thank you martin and ken.will use this info for future reference.paul

    March 20, 2011 at 5:51 pm in reply to: tricity bendix sb431w #347506
    clockworkone
    Participant

    Re: tricity bendix sb431w

    i really do hope you are correct martin. she has manual and says clock is set correctly.(nice little job if you are right)paul

    March 19, 2011 at 11:02 am in reply to: h/pt bf41 start button #347466
    clockworkone
    Participant

    Re: h/pt bf41 start button

    thanks for reply.i told customer that i thought it should pop back up and not latch.they were adamant that it latched.paul

    March 18, 2011 at 9:45 pm in reply to: start switch h/pt bf41 #347409
    clockworkone
    Participant

    Re: start switch h/pt bf41

    thanks martin.

    March 17, 2011 at 10:24 pm in reply to: h/point bf 41 d/washer #347362
    clockworkone
    Participant

    Re: h/point bf 41 d/washer

    sent my e-mail add.thanks jim

    March 17, 2011 at 6:43 pm in reply to: w/pool adp8000 f3 #347031
    clockworkone
    Participant

    Re: w/pool adp8000 f3

    thanks very much colin.paul

    March 17, 2011 at 4:14 pm in reply to: w/pool adp8000 f3 #347029
    clockworkone
    Participant

    Re: w/pool adp8000 f3

    anyone 😆 :lol:.paul

    March 12, 2011 at 11:36 am in reply to: miele w304 pressure chamber #346994
    clockworkone
    Participant

    Re: miele w304 pressure chamber

    thank you clayside for prompt reply,appreciate it.paul

    March 10, 2011 at 11:03 pm in reply to: miele w304 #346552
    clockworkone
    Participant

    Re: miele w304

    that makes sense Mike.thanks a lot

    March 10, 2011 at 8:49 am in reply to: miele w304 #346550
    clockworkone
    Participant

    Re: miele w304

    had a quick look at this yesterday.going back tomorrow. flood protection coming on.slight dribble from door seal and seal in poor general condition. ordered seal. do these have any other leak issues as am not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} pos that this is totally the prob. also customer has removed filter in inlet valve as machine is fed from well and constantly blocking up.advised strongly against this idea.still looking for tips on accessing this one.paul

    March 8, 2011 at 6:22 pm in reply to: hotpoint supermatic #346511
    clockworkone
    Participant

    Re: hotpoint supermatic

    nice one thanks.paul

    March 1, 2011 at 4:23 pm in reply to: Hotpoint WF541G – water valve or dispenser part no. #345908
    clockworkone
    Participant

    Re: Hotpoint WF541G – water valve or dispenser part no.

    should be complete unit but word has it c00110333 will fit with a little alteration of solenoids.paul

    February 24, 2011 at 8:53 am in reply to: whirlpool awz3303 belt change #345507
    clockworkone
    Participant

    Re: whirlpool awz3303 belt change

    thank you martin i appreciate that advice.paul

    February 21, 2011 at 6:05 pm in reply to: hotpoint sy36x oven replacement fan motor #344960
    clockworkone
    Participant

    Re: hotpoint sy36x oven replacement fan motor

    genuine fitted.thanks again

    February 14, 2011 at 9:35 am in reply to: normende wm1000wh tripping electrics #344557
    clockworkone
    Participant

    Re: normende wm1000wh tripping electrics

    thank you jim for the research you have done on this one.would have posted pic but my it skills very limited. maybe someone will recognise it as you say.paul

  • Author
    Posts
Viewing 15 posts - 481 through 495 (of 555 total)
1 2 3 … 32 33 34 35 36 37