Forum Replies Created
-
Posts
-
Re: Beko WMB91242LB
I had one same model same problem, test program quickly revealed it was the inlet valve
Re: at whatpoint did you decide there was a issue
If its a hotpoint then 26 hours sounds about right on cotton cycle. lol
Re: Not a good start to the week.
Pulled up at a job a couple weeks ago to find paramedics there, window cleaner had fell off his ladder and was in a bad way. I said i’ll come back but customer insisted they needed their washing machine sorting
Re: HJA8703 Howdens washer dryer fault
Spray contact cleaner into the selector switch, has always worked for me
Re: Coop Bank failure
The new owner of the business would have to contact all rental customers and issue them with the new bank details, ss he will need to set up a new business account in his name for the limited company ? and also he would have to apply for a consumer credit licence too ?
Re: Hoover DYN7164D Filling at end of cycle
Ok so it turns out as soon as the door locked the machine started to fill regardless of what program was selected.
Pulled the machine out and the bolts from the front weight were on the floor, along with a lot of concrete dust. #writeoffRe: Hoover DYN7164D Filling at end of cycle
Yes i was thinking that, but they say its fills up rapidly then stops. Not slowly over time ?
Re: Old appliances/ scrap metal not being collected!!
Light iron has gone up in value recently the collectors are out in force !
Re: Beko DC7112w
Hi Dave, could you possibly send pm me the Beko test info please. I have a Beko condenser similar model, which isnt heating correctly. Thanks
Re: Hoover DYN7164 Door not locking
To be honest i’ve never purchased a new one. The problems I had were when refurbishing machines so I used replacement pcb’s that I took off machines with bearings gone. Masterpart do stock them but it doesnt mention whether they are programmed or not
