[Criscold]

Re: beko wmi71641

Could be but have you tried entering service mode

[Criscold]

Re: Leisure DWLT 65

Will do, let me know if/when you receive

Sent 17:30

[Criscold]

Re: Neff Dishwasher S51T69X1GB/01

Hi Martin

That was my thought on this but I don’t think any way of testing other than replacement and probably will be the only thing I can try.

Thanks

Colin

[Criscold]

Re: Leisure DWLT 65

Did you receive the mail I sent last week as this was attached

Colin

[Criscold]

Re: zanussi ZDT40 dishwasher

The manual states that the fault code on this is indicated by the end of cycle light flashing and not the start light. Let me have your email if you want the test procedure.

Colin

[Criscold]

Re: beko auto wm6355

Can you run the service program ?

[Criscold]

Re: Whats the most annoying thing customers do?

The customers who knock at your front door on a Sunday morning at 10am because they get the answer phone saying that we are closed until Monday morning.

[Criscold]

Re: Miele WT2670

Thanks Clayside
Colin

[Criscold]

Re: Beko TZDA503S freezer

Also 4312612400 listed on this one

Colin

[Criscold]

Re: Leisure DWLT 65

Let me have your email and can send you some info

Colin

[Criscold]

Re: Hotpoint VTD00

Let me have your email

Colin

[Criscold]

Re: Leisure DWLT 65

I had one like this a couple of years ago
Check Float switch to see if open circuit

Colin

[Criscold]

Re: Hotpoint dishwasher.

LED 1 & 3 Pressure Switch
The machine has filled with 2.5 litres of water but the pressure switch is still in the empty position.
• Check the filter or sump is not blocked.
• Check the pressure switch is not stuck in the empty position (contacts 11-12) or the
pressure chamber or air tube are either blocked, unattached or split.
• Check the wash pump is circulating the water.
• Check the wiring to the pressure switch.
• Check the edge connector blocks on the pressure switch and module card.
• Check the outlet hose is not too low causing the machine to siphon.
• Aborts the cycle and energises the drain pump.

[Criscold]

Re: Indesit Dishwasher DIF04

The machine has filled with 2.5 litres of water but the pressure switch is still in the
empty position.
• Check the filter or sump is not blocked.
• Check the pressure switch is not stuck in the empty position (contacts 11-12) or the
pressure chamber or air tube are either blocked, unattached or split.
• Check the wash pump is circulating the water.
• Check the wiring to the pressure switch.
• Check the edge connector blocks on the pressure switch and module card.
• Check the outlet hose is not too low causing the machine to siphon.
• Aborts the cycle and energises the drain pump.

[Criscold]

Re: Aeg 72620. Pnc 914 001 331/00

Fault indication is only cleared by customer service programe and rectification
Start of costomer service test programe:
With pre-wash and soaking buttons pressed, set rotary selection knob to “gentle spin”
Position of programe knob Button Test function
Off ???? Off
Gentle spin pre-wash Customer service test programe – clear fault code and LED test
Spin ???? water channel pre-wash + level indication
Pumping ???? water channel main-wash + level indication
Starching ???? water channel bleaching + level indication
Delicate rinse ???? water channel soft rinse + level indication
Wool cold ???? water channel pre-wash + level indication
Wool 30 °C ???? water channel main-wash / warm water + level indication
Wool 40 °C ???? fault code displayed
Delicate wash 30 °C ???? heating
Delicate wash 40 °C ???? pump
Easy care 30 °C ???? reversing ( 5s left , 5s break , 5s right mit 27 1/min)
Easy care 40 °C ???? spin with complete field ( 650 1/min )
Easy care 50 °C ???? spin by tapping field ( 950 1/min )
Easy care 60 °C ???? heater adjustment by spinspeedbutton
Boiled / Colored energy save ???? clear the fault file

[Author]

Posts