Forum Replies Created
-
AuthorPosts
-
Criscold
ParticipantRe: Bosch SMV53A00GB/01
Nobody Knows how 🙁 🙁
Criscold
ParticipantRe: Diplomat AHY4410 Integrated Oven Grill Problem/s
I don’t think your problem is associated with the TOC, Do you get the neon on when the grill is turned on and also is the timer working ? According to the drawing the 48 stat is for the cooling fan and you should have 2 x 180 stats, one for each oven.
PM you email address
Colin
Criscold
ParticipantRe: Ariston A1636
Yes I still have your email,will send it in a mo
Colin
Criscold
ParticipantRe: Ariston A1636
I have one here if you still require one
Colin
September 10, 2013 at 12:39 pm in reply to: whirlpool adg7560/1 top stray arm feed hose diconnecting #400924Criscold
ParticipantRe: whirlpool adg7560/1 top stray arm feed hose diconnecting
Normally you will find that one or both of the tabs on the cover plate have broken and you will need to replace the cover plate
Pt No. 481241818341.
They also do a service clip to hold the pipe in place but I have never had to use one myself – Pt No. 481010437349Colin
Criscold
ParticipantRe: AEG Favorit 86070V1 – 911937201/01
Its the configured one Steve Pt No. 973911937201003
Colin
Criscold
ParticipantRe: Servis M0330W
Hi Don
Thanks for that, I ordered an in stock part on ebay last year that took 6 weeks to arrive and have tried to phone these to check but just get answerphone but will email them as I don’t think customer will wait that long.
Colin
Criscold
ParticipantRe: Zanussi Ew1200 motor wiring.
HI
listed as 1249644004
Colin
Criscold
ParticipantRe: Hotpoint CTD40
PM your email
Colin
Criscold
ParticipantRe: Zanussi Ew1200 motor wiring.
Yes but req pnc number as 8 listed
Criscold
ParticipantRe: whirlpool awo/d4705 light error codes
PM your email
Colin
August 23, 2013 at 12:38 pm in reply to: john lewis JLTDC06 Condenser t/dryer ( rebadged Electrolux ) #399891Criscold
ParticipantRe: john lewis JLTDC06 Condenser t/dryer ( rebadged Electrol
I had one a couple of years ago with the same problem tried motor first but turned out to be board. still have the motor if you would like to try it.
Colin
Criscold
ParticipantRe: Lamona HJA 8640
Poss NTC faulty, there is a test cycle for the machine and can send if you let me have your email
Colin
Criscold
ParticipantRe: Dwf 50 light 4 flashing
From The Manual
The inlet valve is letting water by when the valve is closed.
The programme will be aborted and the drain pump is energised.
Note: Earth faults on the heating element and wash pump can display A02.Colin
Criscold
ParticipantRe: beko wmi71641
pm your email address and will send some info
Colin
-
AuthorPosts
