Dapman

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 30 total)
  • Author
    Posts
  • in reply to: Smeg MP66322X Microwave oven #462864
    Dapman
    Participant

    Hi Thanks for all your help you hit the nail on the head,it was in demo mode, unlike a audio system there was no indication on the display.This begs the question did the customer engage by accident which would be difficult or is the history of the microwave different from what they led me to believe.Once again thanks for your help it is appreciated.
    Regards Dave.

    in reply to: Smeg MP66322X Microwave oven #462862
    Dapman
    Participant

    Hi My mistake you have the correct model,the pcb board is a new part and yes i have disconnected the supply to the transformer for safety.
    The ribbon cable connecting the two boards is only three conductors two of which would be needed to power the facia pcb.

    in reply to: Smeg MP66322X Microwave oven #462860
    Dapman
    Participant

    Hi Yes checked door switches,the stirrer fan motor also uses the same supply as the transformer and thus does not work,there is a live supply but no neutral.
    There is no neutral at the pcb,i was thinking it may be a fault with the facia pcb but it counts down and the blower motor starts up.

    in reply to: Washing machine transport cover #462395
    Dapman
    Participant

    If i sell a new machine i will take the old one away.The cover was to protect my van rather than the machine.Back in the day hoover had a padded four sided and top cover that you dropped over the top of said machine, unless anyone has a good way of protecting the bulkhead on a transit custom which is not a flat surface (new van)

    in reply to: Hotpoint f/f xag95ti #454445
    Dapman
    Participant

    Re: Hotpoint f/f xag95ti

    Many thanks for the info.

    Regards Dave.

    in reply to: Whirlpool FSCR12430 #454415
    Dapman
    Participant

    Re: Whirlpool FSCR12430

    Thanks for the info I will check it out.
    Regards Dave.

    in reply to: Bosch microwave hbc84k551b #435029
    Dapman
    Participant

    Re: Bosch microwave hbc84k551b

    Hi Merv
    Thanks for the info

    Regards Dave.

    in reply to: Bosch sg45e12gb/29 dishwasher #393321
    Dapman
    Participant

    Re: Bosch sg45e12gb/29 dishwasher

    Hi
    Martin I think i will write it off.

    Thanks Dave.

    in reply to: Bosch sg45e12gb/29 dishwasher #393319
    Dapman
    Participant

    Re: Bosch sg45e12gb/29 dishwasher

    Hi
    Martin I had checked for component damage but there was nonthing visible, also the three lights above the selector knob flash in unison.

    Thanks Dave.

    in reply to: MIELE T294C #391681
    Dapman
    Participant

    Re: MIELE T294C

    Hi
    Martin no it wont work on a timed setting.I did check the relay coils on the pcb at the rear, they were ok.

    in reply to: BOSCH DISHWASHER MODEL SGI45E12GB/29 #390509
    Dapman
    Participant

    Re: BOSCH DISHWASHER MODEL SGI45E12GB/29

    Thanks Martin
    You can feel the switch clicking as you rotate it.

    cheers Dave.

    in reply to: Miele Novotronic W149 Top Loader #385387
    Dapman
    Participant

    Re: Miele Novotronic W149 Top Loader

    Hi
    Martin thanks for the info,i will check out the lid catch.

    Regards Dave.

    in reply to: Whirlpool ADG450-3 Dishwasher #364953
    Dapman
    Participant

    Re: Whirlpool ADG450-3 Dishwasher

    Hi
    The wash pump is working and not making any strange noises.I have changed many Askol wash pumps on this range of machines.I have seen the machine wash and then i got a call saying there was a problem on rinse.
    Thanks Dave.

    in reply to: Bosch wvd 24520gb/01 #352911
    Dapman
    Participant

    Re: Bosch wvd 24520gb/01

    Hi
    The pump does not make any noise,no does the machine,the door locks, but the door lock light flashes suggesting the door is open.There is no other lights flashing or alarm signals.

    Cheers Dave.

    in reply to: Indesit DF04 UK Dishwasher #306097
    Dapman
    Participant

    Re: Indesit DF04 UK Dishwasher

    Hi

    There was no earth fault showing on the megger which was odd.
    I was not aware that the dishwasher boards needed programming.

    Thanks Dave.

Viewing 15 posts - 1 through 15 (of 30 total)