[dave-m]

Re: Zanussi WJD1257W Error code?

Just looked at the zanussi manual that I had to hand, I’d say they’re the same,
It says:-

Communication error between main board and
display board
Wiring defective; Control/display board defective
Main board defective.

D

[dave-m]

Re: ZWF1221w

Heater is good Martin, just replaced the carbons even though they had half an inch on them and it seems to be ok….I’ll know for sure when she does full washes, cheers for the input.

d

[dave-m]

Re: ZWF1221w

Update.
I’ll start by saying that i’ve not checked the brushes yet (difficult m/c to extract) but I had a few minutes the other day so I put it into diagnostics mode and checked alarms, (both lights flashing once – fill prob). cancelled the alarm and put it thru full diagnostics cycle with no faults and no other alarms showing up.
But, customer says it wont drain or spin unless done manually, it sits there with water in and the ‘end’ light flashing.
Sounds like its in rinse hold but it’s not.
Would the brushes cause this or am i looking at a board?

[dave-m]

Re: ZWF1221w

Maybe martin, although looking at the instruction manual online, i think she may have it in ‘rinse hold’ or she may have a broken spin knob cos when she turns the control knob ‘off’ and on again she can drain/spin as normal when manually selected.
I’ll find out soon enough,

Cheers

d

[dave-m]

Re: Fisher pakel drawer dishwasher dd603

You have mail.

D

[dave-m]

Re: Fisher pakel drawer dishwasher dd603

send me your email and i’ll send you something

[dave-m]

Re: wae2416sgb/01

Thanks Martin,
He says he’s done that already but maybe its a bit of finger trouble on his part, I’ll have a go myself when i’m there…
Cheers

D

[dave-m]

Re: neff oven U1552N0GB/01

Cheers guys
Of course they’ll both be sitting at the kitchen table watching like hawks……
Should be fun…..

D

[dave-m]

Re: Miele W918

Cheers for that Dave

[dave-m]

Re: Belling IDW604 d/w

anyone know how much resistance i should be getting across the thermistor on this.

dm

[dave-m]

Re: Belling IDW604 d/w

Thanks for that seamy, Going back later for another look later….

[dave-m]

Re: CD474

yep 😡

[dave-m]

Re: felt bearing beko drcs 68w dryer

I’ll check it out,

Thanks for that

DM

[dave-m]

Re: felt bearing beko drcs 68w dryer

I just got a call for a snapped belt on a DRCS76W. Its only a few weeks out of warranty, does it need one of these mod kits also? should I go at it or should i get them to chance their arm with beko?

dm

[dave-m]

Re: Whirlpool AWO/D5526

thanks for that whiskey-six, doubt she’ll spring for one of those,

Cheers

DM

[Author]

Posts