Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,031 through 3,045 (of 12,426 total)
  • Author
    Posts
  • in reply to: DIPLOMAT ADP8112 LIGHTS 1 &5 #171099
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8112 LIGHTS 1 &5

    In the known error codes under Smeg 😉

    SMEG error codes….

    Well it keeps coming up, so someones got to do it…….

    E1 – 1st flashing, 5th lit – flood protection system activated.
    E2 – 2nd flashing, 5th lit – safety pressure switch activated.
    E3 – 1st, 2nd flashing, 5th lit – no heat in time allowed.
    E4 – 3rd flashing, 5th lit – temperature sensor fault.
    E5 – 1st, 3rd flashing, 5th lit – no fill.
    E6 – 2nd, 3rd flashing, 5th lit – no drain in time allowed.
    E7 – 1st, 2nd, 3rd flashing – flow meter detected when not fitted Very Happy – reset required.
    E9 – same code as E1, so how you tell the difference is beyond me, but is a related fault to E1 + E2.

    Dave.

    in reply to: Whirlpool Generation2000+ G2P DWS – Dead #171027
    Dave_Conway
    Participant

    Re: Whirlpool Generation2000+ G2P DWS – Dead

    There is no temperature based fuse in this appliance I’m afraid, the information I think you refer to is the NTC device which monitors the water temperature but that wouldn’t make the dishwasher go “dead”.

    Dave.

    in reply to: Belling Built In Cooker #171062
    Dave_Conway
    Participant

    Re: Belling Built In Cooker

    In that case drop me an email to spares@ukwhitegoods.co.uk as I can still obtain these 😀

    Dave.

    Dave_Conway
    Participant

    Re: Door hinges for Bernstein built under fridge model 02800

    Yep, you need 1 of each 246009800 and 246009700 from this link here:

    http://shop.ukwhitegoods.co.uk/index.ph … 27_480_494

    Dave 🙂

    in reply to: Whirlpool Generation2000+ G2P DWS – Dead #171025
    Dave_Conway
    Participant

    Re: Whirlpool Generation2000+ G2P DWS – Dead

    It could be any number of things to be honest with a completely dead appliance.

    I would recommend an engineer for this particular applinace if you’re unsure how to test components effectively, try the repairs@ link below 🙂

    If you do proceed, power off please :zap:

    Dave.

    in reply to: Ariston Waher AIB16 #171064
    Dave_Conway
    Participant

    Re: Ariston Waher AIB16

    F05 is a water level related issue.

    Blockages possibly, level switch or the PCB itself can all cause this.

    Power off if you’re going in youeself :zap: or check the repairs@ link below for an engineer.

    Dave.

    in reply to: Belling Built In Cooker #171060
    Dave_Conway
    Participant

    Re: Belling Built In Cooker

    There were a couple of types on the early 90 models.

    Is this an aluminium flyback type with two springs on it ?

    Dave.

    in reply to: Servis M3025W Door #171036
    Dave_Conway
    Participant

    Re: Servis M3025W Door

    719007000 is the door handle but I can only find the door trim on Connect’s site at £22.50 which seems a tad OTT although not surprising 😉

    It sems to be the same as the M3022 if that’s any help ?

    Dave.

    in reply to: Regulator terminology #170502
    Dave_Conway
    Participant

    Re: Regulator terminology

    😆 😆

    in reply to: Regulator terminology #170500
    Dave_Conway
    Participant

    Re: Regulator terminology

    Done:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=13199

    😀

    in reply to: DIPOLOMAT ADP8322 854500015810 NTC #171017
    Dave_Conway
    Participant

    Re: DIPOLOMAT ADP8322 854500015810 NTC

    I did post that somewhere a while back but I can’t find it now 🙁

    I did find this though – 58.1K at 20C – which is probably the most useful check 🙂

    Dave.

    in reply to: DIPOLOMAT ADP8322 854500015810 NTC #171015
    Dave_Conway
    Participant

    Re: DIPOLOMAT ADP8322 854500015810 NTC

    481228268035 is the part number 🙂

    It seems to cause most faults on these but the light normally pulses on/off to indicate E1 error.

    Dave.

    in reply to: Candy CIC60 Reverse Action Tumble Dryer #161735
    Dave_Conway
    Participant

    Re: Candy CIC60 Reverse Action Tumble Dryer

    Dismantle I’m afraid, with the power off of course :zap:

    Dave.

    in reply to: Homark Oven User Manual #155953
    Dave_Conway
    Participant

    Re: Homark Oven User Manual

    moh04 wrote:Could you also help me with a Homark User Manual.

    Done, or as close as I can find anyway 🙂

    Dave.

    in reply to: Indesit DG6100W tripping rcd. Circulation pump faulty? #170303
    Dave_Conway
    Participant

    Re: Indesit DG6100W tripping rcd. Circulation pump faulty?

    😆

Viewing 15 posts - 3,031 through 3,045 (of 12,426 total)