Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Indesit D63W (UK)
Upper spray arm supply tube – C00054926
Lower spray arm support – C00075111
Dave.
Dave_Conway
ParticipantRe: Samsung Q1636S w/m
It means the problem is with the triac or the tacho, both would need checking :
EB- Motor Triac Short – Tacho circuit – Replace motor
Replacing the motor is an option I guess to see which one is at fault 😕
Dave.
Dave_Conway
ParticipantRe: White Knight CL447WV dryer – cool setting not working
When you say cool you mean the half heat or reduced heat setting ?
One half of the element has probably failed if it is, a pretty straightforward and not overly costly repair.
Power off please if you are to attempt yourself :zap: or check the repairs@ link below for an engineer 🙂
Dave.
Dave_Conway
ParticipantRe: indesit WE14S E10 error code
E10 is a water level sensing problem.
Possibles are blockages, pressure switch, loose connections and possibly the PCB itself.
Power off please if your going to investigate yourself :zap: or check the repairs@ link below for an engineer 🙂
Dave.
Dave_Conway
ParticipantRe: LVU 661 1t dishwasher error lights
It is a Fagor Simon.
From the known error codes:
CDA VFU651T and Fagor dishwasher
All four flashing is a door open fault.
From left to right…
2 lit/1 not/1 lit = Not filling
2 lit/1 not = Overfilling
1 lit/1not/2 lit = Control car, element or safety stat
1 lit/1 not/1 lit/1 not = Temp control failure
1lit/2 not/1 lit = Overheating
1lit/3 not = Leak or inlet hose fault
Dave,
Dave_Conway
ParticipantRe: part no for creda tcr13 start relay
1701157 According to Partfinder as well Dave. 😕
Dave
Dave_Conway
ParticipantRe: Miele w698 washing machine pump
Resent the email 🙂
Hopefully you’ll recieve it this time, I’ve deleted the other post for you.
Dave.
Dave_Conway
ParticipantRe: Hotpoint Iced Diamond fridge
Possibly the switch is at fault or the new bulb is faulty.
A model number please for further help 🙂
Dave.
Dave_Conway
ParticipantRe: GDA BF72 leaking at motorized valve
Part number 1802035 🙂
And yes, it’s the same as the Hotpoint version.
Dave.
Dave_Conway
ParticipantRe: Another rare oven.
Connect’s price is OK in that case, and they have stock.
Let me know if you want it ordered from there Jim 🙂
Dave.
Dave_Conway
ParticipantRe: H/P CTD00G T/D noisy
MickGeorge wrote:Anyone got the partno for the wheels?
I can help with that bit 🙂
Part number 1702964 for just the wheel, 1703273 for the wheel and mount.
Dave.
Dave_Conway
ParticipantRe: HOTPOINT 6180W
613666 is for the top oven with no obvious alternative 🙁
Dave.
Dave_Conway
ParticipantRe: John Lewis own brands
Currently Zanussi (Electrolux) but it depends on the model. Bosch did a few as well I think.
Dave.
Dave_Conway
ParticipantRe: 1000’th topic!
Penguin45 wrote:At 20.37pm today, there were 69,866 topics through the site
:eeek:
Bleedin’ eck missus 😀
Dave.
Dave_Conway
ParticipantRe: smegdwi710e reset
😀
If you follow this link:
http://www.ukwhitegoods.co.uk/modules.p … ile=search
You can search from there, or here is the reset procedure:
Open door
Switch on with door on/off button
Within 3 secs (before display comes on) press programme button 4 times
Lights 1 & 5 should now be flashing (if not repeat until you have this situation)
Press programme button once more and you should be left with only the 5th light flashing.
Switch off (don’t close door)
Leave for a few seconds then switch back on.
Select programme and close door
Machine should now work (stick it on a rinse – if it gets past the main fill you should be OK)
Dave.
-
AuthorPosts
