[Dave_Conway]

Re: Public Information

I can’t find the specific thread but most of the information in it (and I’ve read it a few times) was public to public advice and a lot of that from a particular post on diynot.com from memory.

Before forums there were phones (and still are), it just goes to show what a helpful bunch we appliance engineers are 😉

I can’t recall a single day in over 20 years when I haven’t been asked for free advice on this, that or the other over the phone, and have given it on many occasion as long as the safety aspect is reinforced, the only difference now is we have a wider audience which can only serve to enhance the independents in the public’s eyes I hope 🙂

I’ll get the flak jacket on now 😉

Dave.

[Dave_Conway]

Re: Zanussi condenser dryer TC71P

Keep an eye on http://www.ise-appliances.co.uk 😉

Thanks for the feedback on the shop order, it’s appreciated 🙂

Dave.

[Dave_Conway]

Re: Indesit WDE 12 F-13 error code

Yes, pretty much all detected faults will abort all programmes on these I’m afraid 🙁

Dave.

[Dave_Conway]

Re: Oven Thermostat?

Is this a New World Vogue ?

Are there any other numbers on the rating plate please ?

Dave.

[Dave_Conway]

Re: Rangemaster 110 Drawer roller kit – A094589 wtd

I’ll answer your email for the same shortly 😀

Dave.

[Dave_Conway]

Re: hose for whirlpool AWG 210/7 dryer

You just need a standard 4″ universal vent hose then (check diameter to be sure).

You can see them here:

http://www.ukwhitegoods.co.uk/modules.p … Path=58_99

Dave.

[Dave_Conway]

Re: old tricity built in cooker

It is obsolete, the old part number was 435097 and shows as a C92TH25/195 which may help to cross ref it ?

Dave.

[Dave_Conway]

Re: Delonghi/Caple Base Element

Now sorted thanks to Bryan (R600A) :tup:

Dave.

[Dave_Conway]

Re: hose for whirlpool AWG 210/7 dryer

Do you already have a vent hose fitted (ie need replacement hose only) or do you need a vent kit complete ?

Dave.

[Dave_Conway]

Re: Carlton Dishwasher error

The model may help narrow this down but Carlton is a Currys own brand and there is very limited information available on them I’m afraid.

Dave.

[Dave_Conway]

Re: Indesit W/drier WD11UK…Clicking Through on Timer

In the known error codes Laurence, it’s the usual Indesit Evo controls list.

Indesit Evolution Range Error Codes also refers to the number of flashes on the non-lcd type

F01 Short Circuit-Motor Triac
F02 Motor jammed or tachogenerator detached
F03 Temp probe o/c or s/c
F04 Pressure switch jammed on reset
F05 Pressure switch jammed on trip
F06 Programme selector management error
F07 Heater relay stuck
F08 Heater relay cannott be activated
F09 Incompatable eeprom
F10 Pressure switch not sensing correctly
F11 Pump cannot be be activated.
F12 LCD Display module and main module not communicating correctly.

Dave

[Dave_Conway]

Re: Siemens Hob simmerstat

That Enr isn’t recognised by Bosch Seamy 🙁

Dave.

[Dave_Conway]

Re: Neff fan oven elements

Are these holes drilled all the way through the fan blade or just semi as normally they are just made to balance any weight imperfections to stop vibration ?

Dave.

[Dave_Conway]

Re: AEG Lavamat L12700ViT dryer problem

One of the pulleys on either the motor or fan unit are poorly manufactured or misaligned, it can’t be anything else really 😕

Given the little use the dryer has had it all points to a manufacturing defect.

Have a chat with Electrolux (who own AEG):

http://www.serviceforce.co.uk and see if they can help rectify this for you 🙂

Dave.

[Dave_Conway]

Re: Zanussi FF howling

Apart from the fan motor I can’t think of much else that would make a noise that loud to be honest.

Perhaps it’s time to ask an engineer to attend and check it out ?

Try the repairs@ link below 🙂

Dave.

[Author]

Posts