Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,826 through 3,840 (of 12,426 total)
  • Author
    Posts
  • in reply to: Neff Oven B1593 #162481
    Dave_Conway
    Participant

    Re: Neff Oven B1593

    No adjustment I’m afraid, probably the hinges and/or hinge runners are worn.

    Pretty straightforward repair, check the repairs@ link below 🙂

    If you’re doing this yourself, complete model (Enr…..) please to identify the correct parts.

    Dave.

    in reply to: New door for a hygena gas cooker #162477
    Dave_Conway
    Participant

    Re: New door for a hygena gas cooker

    I can get it for you 😀

    But, it isn’t cheap I’m afraid, £98.49 inc VAT and carriage.

    An email to spares@ukwhitegoods.co.uk please if required .

    Dave.

    in reply to: HOMARK GAS COOKER #162479
    Dave_Conway
    Participant

    Re: HOMARK GAS COOKER

    It doesn’t appear to have an FFD, thermocouple device ?

    Thermocouple – 76X6625
    Thermostat – 76X8640

    Dave.

    in reply to: Diplomat 8702 – Integrated washer dryer #162483
    Dave_Conway
    Participant

    Re: Diplomat 8702 – Integrated washer dryer

    530000101 up to June 2003

    530001500 after July 2003

    Welcome to the site by the way 🙂

    Dave.

    in reply to: Cheep! Cheep! #162421
    Dave_Conway
    Participant

    Re: Cheep! Cheep!

    I was using them as a comparison Martin, as between their own site and all the other one’s they sit behind they sell more appliance spares to the public than anyone else.

    Comet, Co-Op, Argos, Homebase to name but a few, have a look at this little lot:

    http://www.espares.co.uk/sistersites.aspx 😯

    All are basically espares with a different “shirt” on 😉

    Dave.

    in reply to: Ariston Part No’s #162452
    Dave_Conway
    Participant

    Re: Ariston Part No’s

    Timer – C00032853
    Door Lock – C00046180
    Module – C00037892 before Serial 31117…..
    Module – C00042292 after

    Dave.

    in reply to: built in neff washer dryer #162450
    Dave_Conway
    Participant

    Re: built in neff washer dryer

    Model number (Enr… ) Stu ?

    Dave.

    in reply to: Caple C802C Hob #162451
    Dave_Conway
    Participant

    Re: Caple C802C Hob

    Anglo Iberian (IAS) on 08700 494300 🙂

    Dave.

    in reply to: Smeg DWF64SSE Dishwasher #162447
    Dave_Conway
    Participant

    Re: Smeg DWF64SSE Dishwasher

    The only fault codewith lamp 3 flashing should also have lamp 1 on all the time.

    This is an alternating valve fault (upper/lower spray arm director next to the circ motor).

    Dave.

    in reply to: Cheep! Cheep! #162417
    Dave_Conway
    Participant

    Re: Cheep! Cheep!

    Sorted 😀

    Espares are a bunch of total rip-off merchants by the way 😆

    Dave.

    in reply to: Indesit WIDL 126uk Washer/Dryer Drying Query #162439
    Dave_Conway
    Participant

    Re: Indesit WIDL 126uk Washer/Dryer Drying Query

    :wave:

    in reply to: Indesit WIDL 126uk Washer/Dryer Drying Query #162438
    Dave_Conway
    Participant

    Re: Indesit WIDL 126uk Washer/Dryer Drying Query

    The dryer relies on cold water to condense the steam so, either the cold water supply is poor or more likely, you have connected the hoses the wrong way round 😉

    Dave.

    in reply to: tricity bdx door bits #162448
    Dave_Conway
    Participant

    Re: tricity bdx door bits

    Both part numbers you suggest are correct :tup:

    Dave.

    in reply to: Tricity Bendix DW086 fill probs #162307
    Dave_Conway
    Participant

    Re: Tricity Bendix DW086 fill probs

    The two blue syphon tubes are £4.59 each inc VAT plus carriage so it may be worth replacing them to try.

    If you need them, driop me an email to spares@ukwhitegoods.co.uk and I can arrange for you.

    Dave.

    in reply to: ariston margherita a1635 error code 3 ? #162430
    Dave_Conway
    Participant

    Re: ariston margherita a1635 error code 3 ?

    Temperatre control problem, possible poor connections or a sensor failure.

    Power of please if checking yourself :zap:

    It shouldn’t be an overly costly repair either so if you need an engineer, check the repairs@ link below 🙂

    Dave.

Viewing 15 posts - 3,826 through 3,840 (of 12,426 total)