[Dave_Conway]

Re: Whirlpool fan problem

Penguin45 wrote:It may well be after the Bank Holiday however.

Or sooner 😀

That’s a Stoves made oven, Gill, please check around the door area for the rating plate and let me know the numbers from it, especially the one beginning 059????.

I’ll get you the real price then from the manufacturer rather than what Whirlpool decide to charge for the part 😉

Dave.

[Dave_Conway]

Re: Beko D/W Door springs?

The only picture I have is for a DF3421 which I would imagine is similar if not the same door arrangement.

Door springs and straps by the look of it, if you PM me your fax number I’ll send it over, I can’t convert to PDF on this one.

Dave.

[Dave_Conway]

Re: C9 fault code on AEG LAVAMAT 72620

C9 is mtor related.

Basically it’s not turning, check the carbon brushes 😉

Unplug 1st though :zap:

Dave.

[Dave_Conway]

Re: Whirlpool ADG 994 dishwaher – stuck on drain

Is there any water in the base of the dishwasher ?

You should also be able to count the flashes from the start light as DP mentions above.

Dave.

[Dave_Conway]

Re: homark ignition switch

Can’t find that one listed, how old is it ?

Dave.

[Dave_Conway]

Re: Training

Don’t worry lads, I’ll keep an eye on things 😆

Plus I’m in CES today anyway 🙁

I’ll be in the site tonight as well no doubt, mind you I got a load done at home yesterday including lawns mowed, various dead animals removed from the garden and pond, spare bedroom cleared in readiness for my PC and other office type bits 😉

Dave.

[Dave_Conway]

Re: Asea Cylinda 1500

Bill, are those part numbers you gave suitable for this motor by any chance ?

IB-MEI are global so there must be a crossover somewhere 😀

Dave.

[Dave_Conway]

Re: Chris!!! Please explain??

😯 :eeek:

LMFAO :rotl:

Martin will moan about the one liner :duck: :stir:

Dave.

[Dave_Conway]

Re: Any Ladies Present?

Very interesting in many ways this thread…

To be refered to as an engineer in the true sense you have to have a degree, which is actually correct.

So where is the engineering degree in appliance repairs ? Pretty much all of us would qualify for that…

Training, qualifications………

One to ponder 😉

Dave.

[Dave_Conway]

Re: Hanning Pumps?

Purchased from HT Maddocks by any chance Martin ?

Dave.

[Dave_Conway]

Re: Replacing fan element on oven of Creda C361E cooker…

coconut wrote: do I get the part from Creda?

Noo ! 😀

You can get it from the shop here:

http://shop.ukwhitegoods.co.uk/Cooker+{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} … ement.html

Dave.

[Dave_Conway]

Re: homark ignition switch

We’ll need the model number from the underside of the hob first of all please, it shouldn’t be a problem getting the button though Micky.

Dave

[Dave_Conway]

Re: New World rating plate

Inside the warming drawer if there is one perhaps ?

Don’t forget as this is a gas appliance you will need a Corgi registered engineer to fit the thermostat for you so it may be wise to ask one to come and identify the thermostat before ordering.

Dave.

[Dave_Conway]

Re: aeg lavamat 6350

Well, as long as there are no blockages anywhere then it can only be the pump 😉

Dave.

[Dave_Conway]

Re: Blomberg 1501 AAA Fault’s

The hot inlet valve will need to be replaced to stop the water filling over time, as far as the not taking the softener, more often than not the dispenser is clogged.

Dave.

[Author]

Posts