Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: complete engineer
The cost is reasonable I agree, my negative comments were aimed at GBdar and the software development company.
If they can’t even get their own web site completed correctly then it doesn”t exactly fill me with confidence in their products to be homest 😉
Over the last few months, as you know, Ken and I have looked at quite a few shall we say, they all claim to do pretty much the same as this one but are more often than not based on other software types and adapted to suit.
If they do have a demo available, I’d be interested to have a look at it 😀
Dave.
Dave_Conway
ParticipantRe: Ariston ALV95 Model # 46303610000
Try holding the start button in for 20 seconds stevo and see what happens.
As Clyde pointed out to me, this does look like a Hotpoing in disguise and that resets the PCB on most of them.
Dave.
Dave_Conway
ParticipantRe: AEG Competence 320F spares
Got the info for you Ollie:
Top oven seal – £16.80
Main oven seal – £19.11
Fat filter – £6.93Please add £3.50 postage, all inc VAT.
You know my email address if required 😉
Nice to see the Philco still going 😀
Dave.
Dave_Conway
ParticipantRe: Whitegoods logo.
Chris, thanks for asking.
I’ll get back to you on this, I don’t see a problem but I’ll consult with the old bald one and tartan lad 1st 😉
Dave.
Dave_Conway
ParticipantRe: Zanussi Condenser drier won’t go!
It’s possibly the PCB although I would recommend all other possibilities are checkes first.
If you want a price on it, could you let me have the Product code
(PNC) beginning 916??? from the rating plate please Romarj as there are a few versions.Please pull the plug if checking further.
Dave.
Dave_Conway
ParticipantRe: smeg dwf64sse overfill
Sorry Adrian, all of these syptoms would indicate one of the component failures I have already mentioned, I can’t give specific information due to EU regulations and safety.
Please call an engineer to correctly diagnose for you and your troubles will be over 😉
Dave.
Dave_Conway
ParticipantRe: Hotpoint 6960 built in fridge
If you need a set ordered and sent to you drop me an email to spares@ukwhitegoods.co.uk and I can arrange for you Sue 😀
Dave.
Dave_Conway
ParticipantRe: Smeg cooker SUK91MFX gas flow control
Have you tried the repairs@ module dobs ?
Otherwise, take a look in the directories or pop up your postcode (sorry I’m not familiar with london codes).
May I also ask, has the hob got safety thermocouples on each burner, you can tell as they are the type you have to hold the knob down after ignition for a few seconds and on release the burner should stay alight ?
I’m hoping that is all the problem is (faulty thermocouples) as if you think this is a gas flow/pressure issue I must advise you to shut the gas off using the cut off valve at the meter and call Transco on 0800 111 999 to check the gas regulator.
I’m not trying to induce panic, just safety awareness 😉
Dave.
Dave_Conway
ParticipantRe: AEG Competence 320F spares
This shouldn’t be a problem Ollie.
If you could check around the door though for the product number (PNC) beginning either 61?????? or 94????? as there’s a few versions of these ovens.
Dave.
Dave_Conway
ParticipantRe: Bosch KGV-3104-G/04 Fridge Freezer
Looking at the picture on the Bosch site, it would appear to be one of the foamed in types as the thrermistors aren’t shown as spare parts.
Sorry, I can’t help with the wiring etc as I’ve never actually done one myself, I’m sure someone will sort you out though Bob 😀
On the same unit, we’ve just had one of these that’s had three boards in the last 18 months, all of them burn up. The customer has given up and bought a new unit but we are at a total loss as to the cause, no dampness anywhere near it, not outside :con:
Dave.
Dave_Conway
ParticipantRe: complete engineer
Well, I can’t say I would have any confidence in it to be honest, they can’t even complete the web site properly, half the links are dead 🙄 :tdown:
And yes John, they would probably try that as well 😆
Dave.
Dave_Conway
ParticipantRe: Siemens wtxl733 Condensor tumble drier
Andy, they are both the same thing, Bosch, Neff and Siemens are all the same company basically 😉
Stick with the Bosch if it’s cheaper as it will be virtually the same product and you won’t go far wrong 😀
Dave.
Dave_Conway
ParticipantRe: Indesit DI67
It’s got to be a faulty circulation motor in my opinion.
£86.25 inc VAT and postage Archy, I can check the price properly now I’m in the office 😉
Dave.
Dave_Conway
ParticipantRe: Bosch KGV-3104-G/04 Fridge Freezer
Bob, read this thread from the public forum 😉
http://www.ukwhitegoods.co.uk/modules.p … pic&t=2096
Dave.
Dave_Conway
ParticipantRe: Liebherr freezer problem
Good luck Rob 😀
Dave.
-
AuthorPosts
