Dave_Conway

Forum Replies Created

Viewing 15 posts - 9,286 through 9,300 (of 12,426 total)
  • Author
    Posts
  • in reply to: smeg dwf64sse overfill #125019
    Dave_Conway
    Participant

    Re: smeg dwf64sse overfill

    baron wrote:P.S.
    thank’s for your worry’s about the plug…
    I’m not a blondy… 😯

    It’s not meant to infer that you are not intelligent enough to realise the dangers baron, it’s something we have to say to everyone when offering any advice, especially free advice as we could easily be taken to the wall by a clever lawyer should someone hurt themselves while acting on the advice given.

    I’m sure you understand 😉

    Dave.

    in reply to: Greyhound racing… #124831
    Dave_Conway
    Participant

    Re: Greyhound racing…

    I blame sms text messaging 😉

    I think it’s……..

    “I sometimes do the floor at the Stow (a racecourse ?) for T&F Bookmakers (never heard of them 😕 )

    Mainly Peterborough and Race Courses.

    I just thought I’d learn about people and their hobbies.”

    Dave. 8)

    in reply to: Indesit washer/dryer (wdg 1095W) not drying #125081
    Dave_Conway
    Participant

    Re: Indesit washer/dryer (wdg 1095W) not drying

    It’s part of the dryer unit.

    Not a DIY job in all honesty as it entails quite a bit of component removal 😉

    Dave.

    in reply to: Indesit washer/dryer (wdg 1095W) not drying #125079
    Dave_Conway
    Participant

    Re: Indesit washer/dryer (wdg 1095W) not drying

    It’s not easy to tell without taking the condenser apart and physically checking to be honest.

    Perhaps ask one of the previous engineers to take another look ?

    Dave.

    in reply to: Zanussi WJS1265W #125090
    Dave_Conway
    Participant

    Re: Zanussi WJS1265W

    Probably not the thermistor I doubt, the PCB would chuck up an error code I would imagine.

    More likely is the main PCB itself 🙁

    Dave.

    in reply to: Hoover A3950 remember them? #125091
    Dave_Conway
    Participant

    Re: Hoover A3950 remember them?

    Is this the old “big” motor or the logic motor ?

    Old is Qualtex BKT25
    Logic is BKT71

    Dave.

    in reply to: Ariston Margherita A1535 #125089
    Dave_Conway
    Participant

    Re: Ariston Margherita A1535

    Let’s start again shall we 😉

    There’s obviously an error occuring there, hence the lights staying on.

    What did the engineer repair yesterday ?

    As dpm says, you’re first point of call should be to ask them to return and check the appliance.

    It may well be that a different fault has developed since the visit yesterday, it’s not unheard of 😉

    Dave.

    in reply to: Diplomat ADP8224 Display fault #125085
    Dave_Conway
    Participant

    Re: Diplomat ADP8224 Display fault

    I normally throw them away.

    Email me your address John and I’ll send you a faulty one next time we replace one 😀

    I’ll make sure it’s not the display that’s faulty 1st 😉

    Dave.

    in reply to: Indesit DI67 #125010
    Dave_Conway
    Participant

    Re: Indesit DI67

    The anti-flood should reset itself normally.

    Is the dishwasher still not operating after you’ve emptied the base ?

    Dave.

    in reply to: Ariston Margherita LB12T #125084
    Dave_Conway
    Participant

    Re: Ariston Margherita LB12T

    It’s not that old 😉

    If you can’t find it on the list at the top of this forum, try an email to Merloni on mktg.uk@merloni.com

    They will be able to supply a manual.

    Dave.

    in reply to: Finding Homark oven spare parts in Canada or USA #124998
    Dave_Conway
    Participant

    Re: Finding Homark oven spare parts in Canada or USA

    If it is 220-240V version , it’s this one in the shop here:

    http://shop.ukwhitegoods.co.uk/Cooker+{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} … ement.html

    I can send to USA/Canada if required, please order as per the shop@ and I will update you with the postage prices as those quoted are only for UK mainland despatches.

    Hope this helps.

    Dave.

    in reply to: Proline 2kw element #125007
    Dave_Conway
    Participant

    Re: Proline 2kw element

    It’s the famous 76X3719 😉

    In the shop here Emyr:

    http://shop.ukwhitegoods.co.uk/Cooker+{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} … ement.html

    Dave.

    in reply to: ariston a1435 margherita 2000 #124217
    Dave_Conway
    Participant

    Re: ariston a1435 margherita 2000

    :eeek: :zap:

    Order halted Jimmy, except the door bits for the dryer.

    Go for a Bosch family or if you can stretch to it, a Miele 😀

    Dave.

    in reply to: brandt co20fw #124921
    Dave_Conway
    Participant

    Re: brandt co20fw

    There’s two dependant on the date 😕

    45X8924 – £41.99

    After 15/9/03 – 41X0159 – £35.02

    Probably the earlier one I would think.

    Dave.

    in reply to: Branding/Sheets/Holidays #124950
    Dave_Conway
    Participant

    Re: Branding/Sheets/Holidays

    kheath wrote:fuckthekwattoff and have a nice time.

    Indeed 😆

    Dave.

Viewing 15 posts - 9,286 through 9,300 (of 12,426 total)