Forum Replies Created
-
Posts
-
Re: Hotpoint – Change the bearings.
wytze wrote:What a coincidence.
Believe me, it’s no coincidence 😉
wytze wrote:If yes, how to get access??
Take the front panel off 😀
Dave.
Re: Press Release – e-Jobs
Well, we’ve done some improvements on the module today due to feedback from you guys which we hope will make things a little easier for the customer.
This has led to a slight delay in getting E-Jobs live over the weekend as we hoped, but the improvements had to be implemented first as we want to get it right 😉
We are still ongoing with the input of information from the applications already recieved, but as you can see, it’s turned 11pm and we all have to sleep sometime.
Next update tommorow 😀
Dave.
Re: AEG oko lavamat washer, error F9
Carbon brushes are not easy to identify these days Michael as manufacturers use a wide variety of motors, even on the same model.
There’s a pretty good chance the brushes you need are there in the shop but it’s a matter of identifying the correct one’s
Can you email me a photo of them (in the plastic/bakelite holders) I should be able to tell which one’s you need then 😀
Dave.
Re: hotpoint armatures
That’s the one, thanks Mark.
Sorry, I was busy doing stuff with E-jobs 😀
Dave.
Re: Next Pet Project
Flipper wrote:Them prices seem a lot more than distripart prices for the same model , I will check on Monday.
They sure are Flip.
I used to cringe at the Whirlpool prices for Crosslee spares when we were a “Service Partner”.
I’ll also check Connect’s prices for the very same from Crosslee if we can get some “common” part numbers 😉
Dave.
JHuby wrote:They also don’t get man flu
‘scuse my ignorance Jason but what the hell is “man flu” ?
Dave.
Re: hotpoint armatures
You can still get one of them Simon, although I can’t recall which one now 😕
Have a search on the threads 1603070 and 1603071 there’s loads of info there about this 😉
Dave.
Re: ignis akl 394 oven door
First of all Jim the seal isn’t actally a seal as such, it’s a special sealent glue.
Clean all of it off and make sure both surfaces are completely clean but don’t use silicon, you need to use a high temperature compound.
We do actually sell it in the shop here:
Hope this helps.
Dave.
Re: ignis akl 394 oven door
Door removal is described in the user manual, if you don’t have that, take a look at the Bosch website here:
http://www.bshappliancecare.com/Bosch/Bosch_20773.html
Two excellent short videos on how to do it.
As Clive says, the door is then seperated by two screws at the base of the door.
Dave.
Re: Heater for Zanussi Tumble Dryer
Added to the shop 😀
Link is here Francis:
http://shop.ukwhitegoods.co.uk/Tumble+D … ement.html
Dave.
Re: Hoover TV630 – Filter Care Light on TOC not o/c
What you are describing Alan sounds is the thermal fuse by the sounds of it, there’s certainly no electronic components there anyway 😉
Dave.
Re: homark oven controls
miss wrote:I did do a forum search but cant find any pictures. Please please help.
The post is here miss 😀
Dave.
