Forum Replies Created
-
Posts
-
Re: Proline DW 6006 Dishwasher sticks toward end of cycle
bigyin wrote:Where would be the best place to get one from… or shoul I put that question in another part of the forum ?
No, here’s fine.
As this was made for Comet it could be one of a few manufacturers, despite a few checks I can’t find it listed anywhere 🙁
A picture of the pump would be useful if you can email it to me.
bigyin wrote:My postcode is EH51 9JB
RDA Service & Install Ltd 01698 749488 should be able to provide a service visit if required.
Please let them know where you got the number 😀
Dave.
Re: frigidaire fpe526vwew1
Eh ?
I typed that number in to the procorner website and it came up straight away.
Where are you trying to order it from Pinky ?
Dave.
Re: Scandinova Fridge Freezer
Anonymous wrote:Any ideas on the best way to remove the discolouration (looks rusty coloured)?
Not normally no, it’s discoloured the liner, almost impossible to remove.
Anonymous wrote:Can the capiliary be shortened?
No ! If you buy one with a long capillary as required by yours as the stat itself is in the lid, it’s best to coil the excess somewhere, but not in the fridge as has been done before.
You can get a Ranco replacement from the shop here which will do the trick, the link is here:
http://shop.ukwhitegoods.co.uk/vt9-univ … thermostat
Hope this helps.
Dave.
Re: Agenda Items and Invitees
eastlmark wrote:How about someone from Servevast? after all they are pretty near.
Invite sent Mark 😀
Alex, someone from Lux is confirmed as attending, not Steve Clarke though as he can’t make it so he’s asked someone to attend on his behalf.
Also now confirmed are CDSL and NESN.
Dave.
Re: Agenda Items and Invitees
eastlmark wrote:How about someone from Servevast? after all they are pretty near.
Invite sent Mark 😀
Dave.
Re: How To Spot The Engineer
kheath wrote:Kitchen cabinett scars….usually on the top of the head. 🙄
Invisible when inflicted to the non-follically challenged engineer so it doesn’t count :rotl:
Don’t forget the oversized knee caps 😉
Dave.
Re: Proline DW 6006 Dishwasher sticks toward end of cycle
Possibly a blockage somewhere bigyin.
Check the point at which the waste hose connects to the drain, probably a spiggot on your sing trap, blockages can occur here.
Other than that, it’s probably an engineer job as the pump may have failed, someone here should be able to assist with this if required, just let us know your postcode.
Come back and let us know how you get on with the blockage checking 😀
Dave.
Re: Scandinova Fridge Freezer
Hi Dave.
I can’t find this model listed against any manufacturer, it wa probably imported by Comet and rebadged.
Can you remove the thermostat and post up any numbers on it please, the liklehood is a universal type will do the trick.
Dave.
Re: Smeg DWD61 themostat
kwatt wrote:818730825 – Tank Stat (not on my price list :?)
That’s because it’s 818730285 😀
Now superseded by 818731072
Price for that stat is £11.73 list.
Dave.
Re: Creda Reflections Oven Control Panel Lights Problem
If it’s a 48197 as above, follow this link for the user manual, it will have the spec in there for you:
https://www.theservicecentre.co.uk/macr … odel=48197
Dave.
Re: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack
Hi Paula.
It’s defintely the correct kit you have ordered for your model, I just checked your order 😀
For the position of them, the 130C one goes on the left as you look at them from the rear. The old thermostats should have the temperature on them somewhere as well, unless it’s burned off or illegible.
Hope that helps you sort the problem.
Dave.
