Forum Replies Created
-
Posts
-
Re: Replacement Glass for a Ceramic Hob
Anonymous wrote:My advice, ceramic glass is fragile even it can withstand high temperatures…they are not as easy to clean as you’d think. I would avoid EURO KERA at all cost.
EuroKera being the manufacturer of the glass does not exclude your guarantee which is with the cooker manufacturer, not the component manufacturer surely ?
Dave.
Re: F7 error code on Diplomat ADP 8332 Dishwasher
It’s a water fill or water metering fault. These fault codes are only an engineers guide and not conclusive in general.
I would suggest an engineer checks this for you, try the directories on the main menu or let us know your postcode, someone here should be able to help.
When asking for service on this appliance, let them know that it’s actually made by Whirlpool.
Hope this helps.
Dave.
Re: Zanussi DE6744 dishwasher does not start
plus1 wrote:Any idea what could be wrong here?
It could be a number of things to be honest, worst case scenario is the control unit itself, it’s about £80 plus VAT for the part.
It may be worthwhile calling an engineer to confirm though.
Check the directories on the main menu for engineers in your area or pop your postcode up here.
Regards
Dave.
Re: Dippy APM8522 i/a/w.
OK, these are the list prices which would be quoted to your customer were she to phone MFI extracare and obtain the parts herself (excluding VAT):
Backplate/bearing unit – 718001800 £53.55
Backplate gasket – 402011900 £5.99
Module – 546060201 £48.98Trade postage would be £4.00, I’m not sure how much they charge retail customers to be honest, probably the same.
Hope that helps.
Dave.
Anonymous wrote:wait.. im getting conflicting advice i think..
dave thought the £199 tricity bendix machine was quite a good buy.. and that getting a BOSCH would be stepping upSorry to be misleading, what I should have said was, the Tricity would be a better buy then most others in that price bracket,ie, for £200 it would be preferable to others at the same price. But yeah, the Bosch is a better buy in my opinion.
Dave.
Re: Anyone Heard of Siematic?
If it’s a cooker hood, why am I suggesting to check around the door eh ? 😳
😆
Dave.
Re: Teka gas hob
Hi John.
Connect are the distributor for Teka, I can’t find that model listed though. It may be worth a call to them on 0121 766 6222
Dave.
Re: Diplomat ADP 8132 not washing properly
Anonymous wrote:Any suggestions help. Appreciated.
Check the arm itself for a split along the seams, if all seems ok, replace the arm and the arm support.
Water pressure is OK as the lower arm is recieving enough water, unless there’s a blockage in the upper spray arm feed pipe somewhere.
Dave.
Re: Diplomat ADP 8132 not washing properly
woz wrote:Oh ok. is this not a Haier model then?
Nope, it’s a Smeg
Re: Diplomat ADP 8132 not washing properly
woz wrote:Not sure 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} some have these models have a half load function or ECO as it’s sometimes known.
This isn’t one of those models 😉
Dave.
Re: Diplomat ADP 8132 not washing properly
The upper spray arm definitely isn’t rotating.
As it is fixed to the upper basket, when you push the basket back, the arm support tube locates on to the water inlet on the back wall, that’s where the problem will be no doubt.
Either the spray arm support is not fixed to the basket correctly or the seal at the back is misplaced/missing/worn allowing water to escape, therefore low water pressure to the spray arm
Hope that helps ?
Dave.
Re: Homark oven
It’s almost certainly the fan element that has failed.
We will need that model number to identify though, or a picture at least.
Regards
Dave.
