Forum Replies Created
-
Posts
-
Re: INDESIT W103 / W113 etc info about timer constant rotati
Welcome to the site furhan.
The other stuff you were looking for in the public forums should all be in the links section for contacts etc.
If you need MFI/Diplomat/Hygena part numbers just ask, there’s a few MFI agents here 😉
Dave.
Re: No F@@@ers paying
Send a list of outstanding jobs to kgreenhill@smeg-service.co.uk seems to work ok with me every month, although they are a little overdue atm so I’m keping an eye on them.
Dave.
Re: diplomat 8245 error lights
Hi.
Can you post the full model number please. begining ADP/APM/AHY or similar.
Thanks.
Dave.
Re: ORBIT
Are certain officers (one in particular) making it deliberately difficult to arrange the distribution of Orbit ?
Not seen/read
😕
It was sent to everyone involved well over a month ago 👿
Its suitability of content before distribution.
So why is it available for download on dasanet the very same day it was downloaded from UKW ?
Sour grapes methinks. 👿
Dave.
kwatt wrote:Something not quite right there methinks. 😉
Nope, indeed. All major modifications should be subsidised or free IMO, especially considering nearly all the models are less than 5 years old that take this drum kit.
Dave.
Re: Hoover/Candy T/Dryer Drum Mod?
Yeah it does. It comes as a complete mod kit inc drum, rear bearing, heater support etc.
I ordered one last year for an insurance job.
Is you’re customer seriously considering having the job done ? 😯
It’s around £70 ex VAT trade ! 😯
Dave.
Re: Homark Oven
Hi.
I can get one for you, if you drop me an email I’ll let you know the details, cost etc.
Dave.
Re: Blomberg 1301 Washer intermittently blows main fuse
Penguin45 wrote: surely this has to be a heater fault
dave_conway wrote:I would have said so, yes.
😉
Re: Creda 17076 thermistor wiring
Martin wrote: They haven’t ramped up the price of the CD Rom again have they
That was the price anyway wasn’t it ?
I pay a little more for the networked version so other people here can give customers wrong information 😉
Dave.
Re: Creda 17076 thermistor wiring
Martin wrote:No way does this production series of machine have a 3 lead Thermistor nor does it have a conventional thermostat.
Martin, ignore the info on partfinder, the version with the seperate timer and module will have a thermostat, the module doesn’t have a comparitor circuit on those so it can only have a conventional thermostat, it just isn’t listed on partfinder.
I checked the paper manual for this model and versions with timer number 904-2385-0? has a 40/50C thermostat part number 168234
£80 for innacurate info, great eh ?
Dave.
Re: Creda 17076 thermistor wiring
A thermistor with three leads 😕
There’s two versions of this machine, it sounds like you have the earlier one. Easy way to tell is if the module is a seperate part i.e. clipped to the back or side of the timer.
If it’s the early version it will have a thermostat as opposed to a thermistor which would have had three leads.
Check that 1st.
HTH
Dave.
Re: Zanussi drum bearings
rob marshall wrote: but should I use some sealer?
No, as long as the drum seal is replaced there will be no additional sealant required.
Dave.
Re: diplomat adp8322 integrated dishwasher problem
I can’t seem to find the codes list for that exact model, but generally all of these Smeg made dishwashers use the same codes.
F6 is not draining, so check for blockages in the waste system etc.
Regards
Dave.
