Forum Replies Created
-
Posts
-
Re: indesit flashing/timer going round
Lotusray, do these fault codes below, which are displayed on the lcd type(already in “known error codes”) correspond to the number of flashes on the neon type as well ?
F01 Short Circuit-Motor Triac
F02 Motor jammed or tachogenerator detached
F03 Temp probe o/c or s/c
F04 Pressure switch jammed on reset
F05 Pressure switch jammed on trip
F06 Programme selector management error
F07 Heater relay stuck
F08 Heater relay cannott be activated
F09 Incompatable eeprom
F10 Pressure switch not sensing correctly
F11 Pump cannot be be activated.
F12 LCD Display module and main module not communicatingDave.
Re: UK Whitegoods Meeting No.3
Tis yer:
Richard wrote:PTWAPOS or NTBTS
Is that “Yes I’d love to come” ? 😆
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
brian wrote:The only armatures left in our warehouse are the 161498B’s.
Not for long I doubt the way they are being pushed out via special offer emails and faxes 😉
Ta for the info Brian.
Has anyone tried swapping a 161498 for a 1603070/1 and see what happens, is it the usual of uncontrolled motor action ?
Dave.
Re: Graded washing machines.
Chris,
D.A.D. (Domestic Applaince Distributors) on 01452 504084 stck a fair bit of graded stuff, mainly Bosch from experience.
BTW, the export thing isn’t to do with an email you recieved is it ? Only there’s a few going round that are asking this sort of thing and it’s a total scam, take you’re appliances, give you a credit card number then cancel the card.
Dave.
Re: Hotpoint Advertise Franchises!
I’ll keep you updated on the dealings with Merloni on the gas cooker problem.
In the meantime, I’ve offered to repair it ourselves at a nominal fee, I’m waiting on a reply 😕
Dave.
Re: Creda Drier 37760
Hi, parts as follows:
Hinge £5.93
Handle £2.93It may also be worth checking the two small plastic blocks that fit to the hinge, these are £2.93 for the pair.
Postage £3.50, all prices are VAT inclusive.
If you’d like to order just drop me an email and I’ll sort this out for you.
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
Nearly all gone !! (1603071)
I just ordered another 25 and SEME are running out, Merloni have none at all, nor have Connect or Washvac. Although I believe Masterpart and Maddocks did have some back up stock at some point.
FYI.
Dave.
Re: Hotpoint Advertise Franchises!
More news today.
We sold a Creda gas built in oven in April which has a fault and have just learned that there are NO qualified engineers in the area that can repair it.
Great eh ?
The plot thickens 😉
Dave.
Re: Belling BE801E
No I can’t find it either, only the BE803 integrated fridge.
Belling are now owned by Stoves, you can contact them on 01709 579900
And yes I had heard 😉
Dave.
Re: Hvr 7000
It’s almost certainly a D7440 or D7442 range, rounded control panel which matched the old New Wave’s etc.
If it’s the sump that the drain and circ pumps connect directly to then it was part number 09076332 which is now obsolete.
Unless anyone’s got one hanging about, but I don’t suppose you really wanted to change it anyway did you ? 😆
Dave.
Re: S/Steel Homark Oven
Hi Sue
If the model number isn’t around the door anywhere it may be on the oven roof which will mean sliding the oven forwards out of it’s housing.
Most Homark models are in the format ??-?????? to give you a guide.
Hope this helps a bit.
Dave.
Re: Samsung M1714
No idea what those numbers are 😕
Anyway, I picked a couple at random and they all look to be the same so there’s some info on the way that may be usefull 😉
HTH
Dave.
Re: INDESIT W103 / W113 etc info about timer constant rotati
lotusray wrote:i will post fault codes tomorrow as i will hav acsess to a scanner then
That’ll be very handy lotusray 😀
If you wouln’t mind posting them in the “known error codes” thread here http://www.ukwhitegoods.co.uk/postt40.html that would be great.
And welcome to the site.
Dave.
Re: Zanussi DE6965 dishwasher
Alex, have a look at pnc 911917007 on Procorner, there’s a third version as well 😉
Although I do now notice that one is 2004 prduction date, so it’s bound to be one of the pump’s you mention.
Dave.
