Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: intergrated INDESIT dishwasher – di 62
bonzaco wrote:I will fax the procedure down to Dave Conway and get him to put it in the know fault code area.
Thanks for asking 😆
If anyone would like to add known fault codes, it’s quite easy, no different than posting a normal message 😉
Dave.
December 13, 2003 at 8:54 am in reply to: Source of parts for Diplomat E1000 Electric cooker ? #106736Dave_Conway
ParticipantRe: Source of parts for Diplomat E1000 Electric cooker ?
Part sorted, please email me for further details.
Dave.
December 12, 2003 at 9:42 pm in reply to: Source of parts for Diplomat E1000 Electric cooker ? #106734Dave_Conway
ParticipantRe: Source of parts for Diplomat E1000 Electric cooker ?
I’ll check out the part tommorrow for you. The only problem I can forsee, if the part has been removed and the leads taped up, are they labelled ? I’m not sure if I can sort the wiring diagram out for you.
Anyone else have one ?
Dave.
Dave_Conway
ParticipantRe: Chitter Chatter
Has this thread now become the Whisky AppreciatioN Club
Or WANC as it is better known 😆
Dave.
December 12, 2003 at 8:42 pm in reply to: Source of parts for Diplomat E1000 Electric cooker ? #106731Dave_Conway
ParticipantRe: Source of parts for Diplomat E1000 Electric cooker ?
John, Diplomat is a brand name of MFI. You can contact them at any of their stores, they will give you the spares telephone number.
If you get stuck, please reply and I’ll let you have the number when I am in the office.
😀 Are you frustrated because of the problems obtaining this part or for some other reason 😉 😆
Dave.
Dave_Conway
ParticipantRe: Stoves FFD Part NO. 011534453
Ernie, what is the full model ? That FSD part number is a very unusual one, most Stoves ovens use a couple of fairly common one’s. Knowing the information they give out it is probably inaccurate, unless this is an LPG one.
Dave.
Dave_Conway
ParticipantRe: Creda Camargue.
Chris, 6222992 should do it, although it does not have any cut out it should be the correct dimensions to fit. It’s the most common Creda door seal.
Dave.
Dave_Conway
ParticipantRe: Chitter Chatter
ted wrote:dave was worse and his better half even worse.
May I ask who passsed that information on to Ted as he was slumped in a chair by 9.30 mumbling something about rum and cabin boys 😆
Dave.
Dave_Conway
ParticipantRe: Hoover tumble drier timer
sumphose wrote:Thanks Dave, i have the part
It appears you have the wrong part though, the part number given to me yesterday by GIAS (97923270) is a different timer than the one you have.
Regards
Dacve.
Dave_Conway
ParticipantRe: Hoover tumble drier timer
Bit of an odd one this Sumphose. The part number you have is the same one I came up with, superseded from 04750229 or 97923288.
I phoned GIAS today about another part query and I enquired about your’s while on to them. They gave me part number 97923270 which is not recognised by Washvac or Electrue.
I guess if you have a GIAS account you can order it from them, if you get stuck let me know and I can get it for you.
Regards.
Dave.
Dave_Conway
ParticipantIndesit Evolution Range
Indesit Evolution Range Error Codes also refers to the number of flashes on the non-lcd type
F01 Short Circuit-Motor Triac
F02 Motor jammed or tachogenerator detached
F03 Temp probe o/c or s/c
F04 Pressure switch jammed on reset
F05 Pressure switch jammed on trip
F06 Programme selector management error
F07 Heater relay stuck
F08 Heater relay cannott be activated
F09 Incompatable eeprom
F10 Pressure switch not sensing correctly
F11 Pump cannot be be activated.
F12 LCD Display module and main module not communicating correctly.kindly supplied by Bonzaco:
.Dave_Conway
ParticipantRe: Spare parts website recommendations please
guest wrote:you cant get hold of a complete servis washing machine door. the entire thing will be over £80
Sorry, I was refering to the microwave door as you said that you had already sourced the Servis door part(s). As bonzaco has said, if you need anything for the Servis door, pop the model number and serial number in here and someone will reply.
Regards
Dave.
Dave_Conway
ParticipantRe: Electrue/NESN
kwatt wrote:If DSG/Electrue want conditions like that met then, in my honest opinion, they should employ their own engineers and try and force their own workforce to put up with those conditions for the money they pay us.
They would have a damn hard job. I have had an advert placed in our local job centre and in the local paper for over a month. I have not recieved one applicant. And if the other comments are true in another forum about Comet mailing local one man bands and small businesses to try and gain engineers it does not paint a pretty picture.
I know one thing, if you have good engineers, don’t loose them, you will be hard placed to replace them. This is based on local knowledge and I can only assume it’s national.
Dave.
Dave_Conway
ParticipantRe: Zanussi motor tacho
Alex wrote:If it is in one of our shared postcodes then I know I can trust you not to read that number.
LOL 😆
Thanks Alex.
Dave.
Dave_Conway
ParticipantRe: various spare parts
ajp wrote:can anyone help, we are needing help finding the following parts
Details below your’s ajp 🙂
1. heater bosch wta300gb tumble dryer
Same as the Whirlpool heater 481225928675
2. 7″hob ring belling 216wh(?) thats the number the customer gave.
This is just a standard 7″ spiral element
3. door seal and top gasket for butler bdwfh-c dishwasher
No idea, never heard of them 🙁
4. grill selector switch flavel rangemaster 110
Full serial number required
5. pc board & pump asea 770 dishwasher
Asko that will be, circ pump is £70 plus vat, pcb unlisted but similar models are priced at around £150 plus vat, trade !! Contact Electrue as they are the Asko stockists now.
HTH
Dave.
-
AuthorPosts
