dna

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 124 total)
1 2 3 4 … 7 8 9
  • Author
    Posts
  • August 15, 2008 at 4:36 pm in reply to: Whirlpool AWZ681 Tumble Dryer #259451
    dna
    Participant

    Re: Whirlpool AWZ681 Tumble Dryer

    Yes please martin thank you

    August 15, 2008 at 4:03 pm in reply to: Whirlpool AWZ681 Tumble Dryer #259449
    dna
    Participant

    Re: Whirlpool AWZ681 Tumble Dryer

    Hi went there today and there is no blockages. Customer change the heater and thermostats. Don’t know if he has wired them up correctly./ He says it cuts out and then comes back on when it cools downs typical thermostat problem, but these have been changed any ideas or where do i get a wiring diagram from.

    August 15, 2008 at 4:01 pm in reply to: Bosch cooker tripping electrics #259952
    dna
    Participant

    Re: Bosch cooker tripping electrics

    YEah it is wierd don’t know what could cause it to do this apart from the switch itself.

    August 8, 2008 at 6:16 pm in reply to: Wf240 #259020
    dna
    Participant

    Re: Wf240

    Thank you guys for all your help all complete now.

    August 1, 2008 at 10:27 pm in reply to: Wf240 #259016
    dna
    Participant

    Re: Wf240

    Does that mean i need a new spider

    August 1, 2008 at 7:30 pm in reply to: Wf240 #259013
    dna
    Participant

    Re: Wf240

    Thanks for your response it seems as if the drum shaft isn’t long enough to fit through the rear bearing

    June 14, 2008 at 2:11 pm in reply to: AEG D81000m #254496
    dna
    Participant

    Re: AEG D81000m

    yes it is but it turns itself off sometimes even after 10 seconds

    June 12, 2008 at 5:55 pm in reply to: samsung washing machine #254255
    dna
    Participant

    Re: samsung washing machine

    Te is actually ntc open circuit.

    May 20, 2008 at 3:12 pm in reply to: Diplomat error code #252173
    dna
    Participant

    Re: Diplomat error code

    All working this customer must be clever then.

    May 20, 2008 at 3:09 pm in reply to: Pansonic microwave fault code. #252504
    dna
    Participant

    Re: Pansonic microwave fault code.

    does that mean a new board and if so how much and have you got a part number.

    May 20, 2008 at 5:02 am in reply to: Pansonic microwave fault code. #252502
    dna
    Participant

    Re: Pansonic microwave fault code.

    When i put water in it gets hot and what does ry4 mean?

    May 15, 2008 at 3:05 pm in reply to: Diplomat error code #252171
    dna
    Participant

    Re: Diplomat error code

    got customer to try over phone but still says pc, is it hard to do or can the customer do it.??????

    May 10, 2008 at 1:58 pm in reply to: FRIDGE COLD FREEZER DEFORSTING #251791
    dna
    Participant

    Re: FRIDGE COLD FREEZER DEFORSTING

    hello bryan no i haven’t checked anything yet. forced defrost???

    April 20, 2008 at 5:08 pm in reply to: whirlpool washing machine #249811
    dna
    Participant

    Re: whirlpool washing machine

    Machine does nothing will motor brushes do this??

    April 20, 2008 at 4:52 pm in reply to: miele tumble dryer T586C #249801
    dna
    Participant

    Re: miele tumble dryer T586C

    are they easy to spot because i can only see 3 nuts that are for the heater. must have missed the other ones. is it right that the heater is £150. approx

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 124 total)
1 2 3 4 … 7 8 9