dna

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 124 total)
  • Author
    Posts
  • in reply to: Zanussi ZWF1221W Fills then empties #218210
    dna
    Participant

    Re: Zanussi ZWF1221W Fills then empties

    check the heater wire hasn’t come off

    in reply to: dishwasher has no power light #217003
    dna
    Participant

    Re: dishwasher has no power light

    no internal fuse. how old is it it could be the pcb that is faulty

    in reply to: Zanussi Fridge Freezer not cooling #217275
    dna
    Participant

    Re: Zanussi Fridge Freezer not cooling

    99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure its the t/stat. power off if replacing yourself.

    in reply to: Firenzi FWD 1210 automatically drys… #217394
    dna
    Participant

    Re: Firenzi FWD 1210 automatically drys…

    When these machine finish spinning they automaticly go onto dry for about 5-10 seconds. If this is your fault then the machine is ok and it could be that the machine has a hot water pipe connected to it which means it will wash and rinse in hot water. check this out first before you loose faith in this machine hope this helps

    in reply to: Zanussi – jet stream 1600 WJD1667W #217438
    dna
    Participant

    Re: Zanussi – jet stream 1600 WJD1667W

    Check your filter. Put the machine on drain if no noise heard then assume pump seized/jammed. If pump noise is heard then machine must be blocked. check filter and drain hose. hope this helps

    dna
    Participant

    Re: Zanussi Jetsystem 1200 (ZJ124) Wash. machine overfilling

    check your filter. if this is ok then check filter housing(manifold) for possible blocked air chamber.

    in reply to: Zanussi FLE1216W- wiring help needed, please:) #217235
    dna
    Participant

    Re: Zanussi FLE1216W- wiring help needed, please:)

    if they are to brown wires they go on the element doesn’t matter which way round. hope this helps

    in reply to: bosch dishwasher drains for ages #216767
    dna
    Participant

    Re: bosch dishwasher drains for ages

    Thank you martin i repair appliance every day for service force and there are common things that cause out antiflood devices to activate just wondered if there was any common problem with bosch thanks again very much appreciated

    in reply to: Zanussi DE6965 AL6 error code! Machine not draining. #216532
    dna
    Participant

    Re: Zanussi DE6965 AL6 error code! Machine not draining.

    And yes penguin this will cure the prblem even if the iwms is sludged up. have done at least 100 of the kits and it works every time, thank you.

    in reply to: bosch dishwasher drains for ages #216765
    dna
    Participant

    Re: bosch dishwasher drains for ages

    Dont like your attitude penguin.

    in reply to: Zanussi DE6965 AL6 error code! Machine not draining. #216531
    dna
    Participant

    Re: Zanussi DE6965 AL6 error code! Machine not draining.

    PENGUIN this isnt the part number of the iwms its the part number for a modification kit which does cure the problem it adds a new pressure switch and a double valve. the pressure switch acts as an overfill pressure switch and the double valve well its a double valve i am a member of the trade part actullay just thought i was helping SORRY!!!!!!!

    in reply to: AEG 60870 problem #216616
    dna
    Participant

    Re: AEG 60870 problem

    Hi this could be a problem with regenation dosage being block(side tank on left hand side of machnine. part number 1118146-107

    in reply to: Zanussi DE6965 AL6 error code! Machine not draining. #216528
    dna
    Participant

    Re: Zanussi DE6965 AL6 error code! Machine not draining.

    this will cure your problem Composition of ATB Pressure Switch conversion Kit: 5027 86 65-00/0

    in reply to: bosch dishwasher drains for ages #216763
    dna
    Participant

    Re: bosch dishwasher drains for ages

    what causes the base plate to flood

    in reply to: Problem with Zanussi ZJD 125 Jetsystem Turbo Dry 1200 #212983
    dna
    Participant

    Re: Problem with Zanussi ZJD 125 Jetsystem Turbo Dry 1200

    The problem that faygamo had is the the belt on the ventilator comes off due to the ventilator not aligned properly. they have sorted the problem now and the new machine dont have this problem.

Viewing 15 posts - 106 through 120 (of 124 total)