Forum Replies Created
-
Posts
-
Re: miele tumble dryer T586C
I newly got it out but it seems that the manifold at the bottom will also have to come out. But still cant work out how the heater will come out i have taken the drum plate off which is held in by 6 machine screws. but thiis seems to have rivots also which are connected to the heater metal ducting in some way. really confused.
Re: AEG Fridge Freezer door light flashing
This is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} a PCB problem
Re: Miele tumble dryer will not start
No it wont work on any program Marrtin
Seamy i dont think it is the door lock as the anticrease light is on all the time i think it might be pcb but not sureRe: CANDY PCB CONFIGURATION
Hi martin the numbers i have are
3100060705275035
CNW156T80
The PCB that was fitted was the un configured one hence the problem we are having can you confirm the part number for the configured on.
The fault agian is that it is continuly draining. machine mega up 252Mohms.Re: SERVIS WASHING MACHINE
I have check the module for dry joints and i have check the motor tacho windings and brushes all seem fine. The bit that is wierd is the intermitant pulsing on filling and draining
Re: zannusi dishwasher zd16053qx pnc 911893061
have a look at the hose that goes from the heater to the sump and pump sometimes these have pin hose in.
Re: Neff integ dish no spray.
not that difficult should take no longer than 40mins to do whole repair.
