don

Forum Replies Created

Viewing 15 posts - 1,891 through 1,905 (of 8,041 total)
  • Author
    Posts
  • in reply to: Wiring Diagram for Bosch Circulation Pump #438309
    don
    Moderator

    Re: Wiring Diagram for Bosch Circulation Pump

    Hi

    Sadly we are unable to advise on wiring issues rule 8 applies. Probably not what you want to hear but it’s there.


    Don

    in reply to: Bosch WAQ283S0GB Drum bearings #438308
    don
    Moderator

    Re: Bosch WAQ283S0GB Drum bearings

    Hi

    You won’t find any bearings or seal as you can only get the whole drum. There is here on this very subject.

    You say the machine is about two years old, you could ring Bosch giving them the ENR and FD number from the inside of the door as they may replace drum under their two year warranty.


    HTH 🙂

    Don

    in reply to: Whirlpool 3RLEQ8033SW1 American dryer TOC #438293
    don
    Moderator

    Re: Whirlpool 3RLEQ8033SW1 American dryer TOC

    Hi

    Sears web site here shows your model. American site, prices and part numbers though.


    HTH 🙂

    Don

    in reply to: Bosch W Machine Load Senser Pain in Neck #438075
    don
    Moderator

    Re: Bosch W Machine Load Senser Pain in Neck

    We sell loads of Bosch and I have to say that we have not had this issue at all. Could be our customers don’t wash that type of mat in the washing machine though.

    I’d rather have it over sensitive and have the machine last longer than the other way around.


    Don

    in reply to: samsung error code problem #438288
    don
    Moderator

    Re: samsung error code problem

    Hi

    Can you post up the model number please 🙂


    Don

    in reply to: Bosch W Machine Load Senser Pain in Neck #438070
    don
    Moderator

    Re: Bosch W Machine Load Senser Pain in Neck

    Small bath mat? put a hand towel or two in with it.

    Don

    in reply to: UDW601 Integrated Dishwasher (IP21 – 091204021) #438273
    don
    Moderator

    Re: UDW601 Integrated Dishwasher (IP21 – 091204021)

    Hi Jonty

    Google search here suggests Premium Appliance brand and Beko. Sadly not a lot to go on.

    Don

    in reply to: Miele WDA201 and WDA211 #438208
    don
    Moderator

    Re: Miele WDA201 and WDA211

    Hi

    You could go for either of those.

    As well documented on this site they are about the best you are going to get. Looking at the part explosions both are fully repairable no sealed tank here 😉 I see the WDA211 currently has a promotional five year warranty with it.


    HTH 🙂

    Don

    in reply to: Word Count #191741
    don
    Moderator

    Re: Word Count

    I have read that article twice now carefully I cannot find anything wrong with it at all. I even Googled bucketload cos I thought maybe it should have a hyphen or space between the two words.

    I await Jim’s inspection and comments 🙂

    Don

    in reply to: Word Count #191738
    don
    Moderator

    Re: Word Count

    Hi K

    I did read it through yesterday but couldn’t concentrate after the Osteopath had had his way with my back and side!!

    Good article as always.

    Don

    in reply to: Bosch W Machine Load Senser Pain in Neck #438068
    don
    Moderator

    Re: Bosch W Machine Load Senser Pain in Neck

    I didn’t mention before as I assumed that garn had checked the wash label to see if it should be hand, machine washed or indeed dry cleaned.

    I also forgot to mention to turn it inside out for added protection.


    Don

    in reply to: Whirlpool AWO/D050 #438086
    don
    Moderator

    Re: Whirlpool AWO/D050

    Hi

    Sadly we cannot help with wiring issues, forum rules number 8 applies.

    Someone may be able to point you in the right direction but that’s as far as we can go.


    Don

    in reply to: Bosch W Machine Load Senser Pain in Neck #438066
    don
    Moderator

    Re: Bosch W Machine Load Senser Pain in Neck

    Hi garn

    I’d use the delicate cycle which will be the best wash and spin at 600 in order not to damage the fabric. There are some who would wash cashmere in a net bag.

    To stop the out of balance kicking in add a couple of pillowcases or something similar.


    Don

    in reply to: Looking for non-standard size dishwasher #438052
    don
    Moderator

    Re: Looking for non-standard size dishwasher

    Hi

    Iv’e looked at all the mainstream suppliers and sadly I can’t find a thing. It would have to have been a slimline machine at 450 wide, the height is standard and the narrowest depth I can find is 570mm.

    Table top aside there is nothing that I am aware of that would fit.

    Don

    in reply to: Hotpoint fridge/freezer handle fitting? #426439
    don
    Moderator

    Re: Hotpoint fridge/freezer handle fitting?

    Hi

    The model number of the appliance would help me to help you 🙂


    Don

Viewing 15 posts - 1,891 through 1,905 (of 8,041 total)