Forum Replies Created
-
AuthorPosts
-
don
ModeratorGood to see you back again. 🙂
Where have you been since your last post back in July 21?
don
ModeratorBest reliability will be Liebherr but also among the most expensive. For a good all rounder without paying the earth and In no particular order Hotpoint, Bosch, Zanussi and Beko.
Don
don
ModeratorThat’s good it means you have the more popular sliding system.
Every built in manufacturer produces a 50:50 sliding hinge fridge freezer. It just comes down to your budget and the door and shelf configuration you prefer.
Don
don
ModeratorAll 50:50 split will have the same set up. Can you post up the model number of the existing appliance please so I can check whether you have a fixed or sliding hinge system. Door reversal should not be a problem with either set up.
Don
don
ModeratorThe majority of American style models are 177 to 179cm tall. There are a couple of Fisher Paykel models which would fit but you will need deep pockets. AO prices here The alternative is seperate fridge and freezer as long as you have enough width.
Don
September 14, 2023 at 6:11 pm in reply to: Part number for Belling dishwasher pump seal – 444444033 #488018don
ModeratorConnect says it’s a Stoves made appliance.
Sadly no wash pump seal listed as a seperate item, the complete wash pump is 082650296 at silly money!!
Don
don
ModeratorPanasonic SD-B2510 breadmaker on Amazon at £129.00 currently.
Black Friday is in November so it may pay you to wait.
Don
don
ModeratorGeneration 2000 covered a very wide range of appliances.
Can you post up the model number or better still the 12 digit number code starting 8596…….. hopefully then someone may be able to help 🙂
Don
don
ModeratorI knew a dealer (now retired and closed) who was a Euronics dealer. He liked the the structure and support he recieved but wasn’t keen on the restrictions placed regarding pricing etc. Then there is the Euronics branding signage and POS etc. I don’t know how much you have to put in financial and otherwise to become a member. Have you looked at https://www.siriusbuyinggroup.co.uk/ as an alternative which is purely a buying group which was set up by Gordon Jones from RETRA?
Don
don
ModeratorIt’s a well known fact that the build quality is not the same as it was ten years ago and that goes for Miele as well. They still represent good value and are still in front compared to the others. The equivalent Bosch is near to £500, will the Miele last longer? Who knows but if it’s well cared for with salt and rinse aid it should give you good service for quite a long time.
Don
don
ModeratorHi all
Safely back in UK early hours of Monday after our jollies abroad. Had cricket yesterday so just catching up.
Don
don
ModeratorThat’s better. It will save us trying to explain to posters how to upload to a hosting service first.
Don
don
ModeratorIf you are going for a vented I would recommend a sensor dryer rather than a timed only option.
Don
don
ModeratorThe only freestanding one an find is the Liebherr SRBstd529i in stainless steel which ticks every box you can think of. They are also regarded as the best you can buy in refrigeration. However it comes at a wopping 2.6k !!
This aside there are a couple of Beko fridges with the refillable water tank in the door, this does take up door storage spce though.
The other alternative is to go for an American side by side with plumbed water function but you would need to make a width of 90cm minimum for it to fit.
Don
don
ModeratorFreestanding or integrated? Any size measurements would help please.
Don -
AuthorPosts
