don

Forum Replies Created

Viewing 15 posts - 2,986 through 3,000 (of 8,041 total)
  • Author
    Posts
  • in reply to: Dyson dc25 brush head #403866
    don
    Moderator

    Re: Dyson dc25 brush head

    Found a forum on Dyson cleaners.

    DC25 explosion here You can now get the brush roll motor from them as well here, much cheaper than buying the complete assembly if you need one.


    Don

    in reply to: Dyson dc25 brush head #403863
    don
    Moderator

    Re: Dyson dc25 brush head

    We have had a few where the brush roller motors have failed. Trouble is you can’t get the motors as a spare, good old Dyson :rolls:

    I take it you have tried the motor reset switch on the side of the brush roll 😉

    We have also had some where there is no power at the brush head socket on the body which has lead to a broken wire.


    Don

    in reply to: Hotpoint hinge reversal on Trio? #403858
    don
    Moderator

    Re: Hotpoint hinge reversal on Trio?

    Hi

    I can’t find a manual for it online I’m afraid. I’ll have a look tomorrow morning when I’m back in the shop unless anyone else jumps in first.


    Don 8)

    in reply to: Scottish Black Pudding #403846
    don
    Moderator

    Re: Scottish Black Pudding

    I don’t know about Irn bru with vodka but chips and gravy is big everywhere, even down here in the far reaches of south west fish and chip shops sell gravy.

    Can’t have the Scots thinking they have the exclusive claim on it can we :mrgreen:


    Don

    in reply to: Football Season 2013/14 #399052
    don
    Moderator

    Re: Football Season 2013/14

    Just a little happier now 1-1 half time.

    Don

    in reply to: Football Season 2013/14 #399050
    don
    Moderator

    Re: Football Season 2013/14

    iadom wrote:Oops, Saints concede after 12 seconds , scored by Stokes goalkeeper. :rotfl:

    Bloody wind 😆

    Don

    in reply to: worn oven markings #403650
    don
    Moderator

    Re: worn oven markings

    Hi

    Are you or someone else able to take the oven out and look at the back of the appliance? Sometimes there is a label there as well.

    Don

    in reply to: worn oven markings #403648
    don
    Moderator

    Re: worn oven markings

    Hi

    All three versions have three control knobs 😉 To make a positive ID we do need the all the numbers from the rating plate which is usually found where the door closes against the cabinet either bottom left or right hand corner.

    The serial number is the most important one 🙂


    Don

    in reply to: Whirlpool door seal #403770
    don
    Moderator

    Re: Whirlpool door seal

    481246068617 Jim 🙂

    Don

    in reply to: i have some bankrupt bling going cheap #403762
    don
    Moderator

    Re: i have some bankrupt bling going cheap

    Moved to Trade classifieds 😉

    The bling is probably worth more than the oven :rotfl:


    Don

    in reply to: Swan Washing Machine Spares #403752
    don
    Moderator

    Re: Swan Washing Machine Spares

    MickGeorge wrote:Thanks for the reply Martin.

    Connect gave me the part no’s for the two parts.
    PCB is VST20741016
    Button tree is VST42057304

    If any one can help would be appreciated – not really sure it needs the pcb as its only the button tree thats broke?

    Thanks

    Mick

    If you mean the button tree above send Jackal a PM he may be able to help you.

    Don

    in reply to: Bosch extractor fan – problem with random lighting #403703
    don
    Moderator

    Re: Bosch extractor fan – problem with random lighting

    Hi

    Can you post up the ENR and FD numbers which can be found usually on a label near or on the motor unit.

    With this info some one may be able to help.

    Don

    in reply to: Bosch drum bearings & Seal #403641
    don
    Moderator

    Re: Bosch drum bearings & Seal

    That Connect part number goes to BSH 172686.

    Don

    in reply to: What to consider when buying? #403502
    don
    Moderator

    Re: What to consider when buying?

    Numatic do not make upright cleaners 😉 however their tub cleaners like the Henry are the best ones out there for value, ruggedness, performance and lifespan IMO.

    Don

    in reply to: Help with finding a part number #403531
    don
    Moderator

    Re: Help with finding a part number

    Hi

    After a lot of digging I believe it’s this one which looks very much the same as this Bosch in our own shop and cheaper as well 😀

    You may want to remove the one you have first and compare before you order one.


    HTH


    Don

Viewing 15 posts - 2,986 through 3,000 (of 8,041 total)