don

Forum Replies Created

Viewing 15 posts - 3,031 through 3,045 (of 8,041 total)
  • Author
    Posts
  • in reply to: locating serial number #402130
    don
    Moderator

    Re: locating serial number

    Hi

    Usually found by opening the door, look along the door edge you should see a label with the model and serial number on it.

    HTH 🙂

    Don

    in reply to: Diplomat gas oven ADP0150 #402093
    don
    Moderator

    Re: Diplomat gas oven ADP0150

    Hi

    Yes a Gas Safe engineer will be able to sort that for you.

    Link here for our find an engineer.


    Also this link regarding gas repairs.


    HTH 🙂

    Don

    in reply to: Football Season 2013/14 #399013
    don
    Moderator

    Re: Football Season 2013/14

    Life is pretty darn good down at St Marys :rotfl:

    Don

    in reply to: Stoves 900EF Grill energy regulator conversion – Help Please #401964
    don
    Moderator

    Re: Stoves 900EF Grill energy regulator conversion – Help Pl

    Have a look at the related posts towards the bottom of this page fair bit of info there 😉

    Don

    in reply to: Football thread locked #401905
    don
    Moderator

    Re: Football thread locked

    Don’t know how that happened, Jim the red not guilty 8)

    Now unlocked 😀

    Don

    in reply to: Need advice choosing dual fuel fs cooker #401696
    don
    Moderator

    Re: Need advice choosing dual fuel fs cooker

    Hi

    I think I have this right 😐 it would appear that the CH60DTCFS and other colours have the thicker gauge shelves which enter through the liner and then sit on supports on the side wall of the cavity.

    The HUD range have shelves which sit on the liners themselves.

    The other models have the ladders fitted to the side walls.

    I have to admit having had a quick play with all three sets of shelves I do not see what the problem is with the shelving.

    The CH shelving is really good and strong, HUD slightly thinner but still substantial and the others do have very slightly thinner shelves.

    As for no support at the rear of the shelving I have never known that on a fan oven.

    A phone call to the Hotpoint pre sales advice line may reveal a little more 08000 921922.


    HTH 🙂

    Don

    in reply to: Need advice choosing dual fuel fs cooker #401694
    don
    Moderator

    Re: Need advice choosing dual fuel fs cooker

    Hi

    I like the latest range of Zanussi cookers but sadly they no longer produce a dual fuel model.

    For your budget take a look at this AO link. Everything considered my first choice would be the Cannon second the Hotpoints and then the rest.

    Cannon and Hotpoint are part of the same group but the Cannons do seem to have a better build especially on the door area.

    If it were me I would visit my local Curry’s and a John Lewis to get a feel of the machines themselves.


    HTH 🙂

    Don

    in reply to: NEW WASHING MACHINE. #401658
    don
    Moderator

    Re: NEW WASHING MACHINE.

    Hi

    In a two horse race I’d pick the Bosch everytime. Much better engineered and a two year warranty to boot.

    HTH 🙂

    Don

    in reply to: HELP Bosch washing machine changing door seal #401627
    don
    Moderator

    Re: HELP Bosch washing machine changing door seal

    Grumps wrote:

    j3lly wrote:
    Hi
    I need to change the door seal on a Bosch washing machine

    I see you found your way from the Ultimate Handyman site. 😀


    Thanks for your recommendation Grumps on the UH forum very kind of you 😀


    Don

    in reply to: Miele Condenser dryer t495c on/off switch #401651
    don
    Moderator

    Re: Miele Condenser dryer t495c on/off switch

    Hi Nick

    Part number is 4765260. You could try Dave in the UKW shop. An email to spares@ukwhitegoods.co.uk should get things started.

    If Dave can’t help you could try Ebay.de

    Don

    in reply to: BEKO DRYERS #401643
    don
    Moderator

    Re: BEKO DRYERS

    Hi George

    Sorry Martin but Beko DRVT71W is a timed only dryer.

    Don

    in reply to: HELP Bosch washing machine changing door seal #401625
    don
    Moderator

    Re: HELP Bosch washing machine changing door seal

    Hi

    Still the same part number as in my previous post :tup:

    Don

    in reply to: HELP Bosch washing machine changing door seal #401623
    don
    Moderator

    Re: HELP Bosch washing machine changing door seal

    don wrote: you will need the ENR and FD number which can be found on the inside of the door frame to get the correct one.

    Don


    If your’e ENR is WAE24363GB/11 then the door seal is one of these two in our shop.


    Don

    in reply to: HELP Bosch washing machine changing door seal #401621
    don
    Moderator

    Re: HELP Bosch washing machine changing door seal

    Hi j3lly

    You can purchse the door seal through our spares shop here , you will need the ENR and FD number which can be found on the inside of the door frame to get the correct one.

    If you are competent DIYer not to bad a job, there are some videos on You Tube as well if you are not sure.

    If you are not sure you can always use our find an engineer here who will carry out the job for you.

    HTH 🙂

    Don

    in reply to: Football Season 2013/14 #399006
    don
    Moderator

    Re: Football Season 2013/14

    Andy jones wrote:As a Liverpool fan I’m lying low lol. Well done saints though well deserved


    Looks like Jim the Red is also doing the same 😛


    Great result for us at Liverpool which sees us ahead of Man U in the table as well 😀 now that doesn’t happen very often :mrgreen:

    Just a shame Exeter City couldn’t do the same 😈


    Don

Viewing 15 posts - 3,031 through 3,045 (of 8,041 total)