Forum Replies Created
-
Posts
-
Re: edit my own details
Hi
Ken produced a good guide here on how to edit your product groups etc. If you need to change any postcodes you will need to pm or mail Ken directly as only site admin can make these changes.
Don
Re: Siemens motor?
Hi Jim
Could your machine be a WK61420GB/01? If it is then motor end cap is available on part number 096805.
Don
Re: Miele PT7136W sensor Part no
Hi lawrence
Four versions listed for that dryer.
PT 7136, PT 7136OS, PT 7136 PLUS and PT 7136 VARIO. Don’t want to quote and get it wrong just in case they are different.Don
Re: W/Knight CL372 WV Drum Earth Strip?
Hi Graham
Unless anyone comes up with the part number, the best way forward may be to contact Crosslee direct as Connect and Qualtex do not mention the earth strip.
Don
Re: electric oven no back plate??
Hi funbobby
The all important make and model number may help 😆
DonRe: ceramic 60cm hob
probably a cost thing I expect Dave. That 6mm round flex I mentioned is good stuff as it’s easier to manipulate in the match box connector units some manufacturers are now fitting.
Don
Re: ceramic 60cm hob
Hi Dave
BSH hobs are the best, Indesit are rubbish as are Gorenje. Beko are about average. A lot of Hotpoint hobs now come fitted with the round 6mm flex.
Don
Re: Charles Hyde and Son Closed??
Hi
Glad to say they are still there 😀
Just rang CHS on the usual number 01759 303068 and they answered in a few rings.
Don
Re: Air Purifier question
Hi BlackKat
Not something we get into I’m afraid. Had a quick hunt on the net for you with not a lot of joy.
May be better to ask the question in one of the forums I found here from a Google search.
HTH 🙂
Don
Re: Database
Hi Steve
A recent thread here seemed to cover most of the questions. I’m sure if you need to know more someone will be able to help.
Don
Re: blank off nuts
Hi Cras
Not seen or used any plastic ones. We use only the brass ones and have had no problems whatsoever. Connect have BLK9029 a 10 box pack or Qualtex QUALPG44. Both come out at 89p for each cap.
Don
Re: Welcome back penguin45
Martin wrote:P45? Back? Where’s he hiding..??? ❓
Trade tech enquiries in the small hours of this morning 😉Re:
I was just considering his latest retort in response to Ken dissaproving his last post.
If we approve it are we seen to be giving in and lowering our own standards. If on the other hand we dissaprove his latest effort will he continue by pm or emails anyway?
Don
