[don]

Re: Cannon Range Cooker Dual Fuel 10455GF

Hi BobG

As it’s brand new and appears to have a fault I would contact Cannon service ASAP in the hope they can have a Gas Safe engineer to you before christmas.

Sadly we are unable to advise any further on gas repairs as forum rules apply.

Don

[don]

Re: Neff oven door hinges?

Hi Jim

According to BSH spares they are handed for that ENR, 260797 on the left and 260798 on the right.

Don

[don]

Re: Hood stopped working

Hi Nina

Model number would be good please, usually found on the inside of the hood.

Don

[don]

Re: Hacked Off About Internet Pricing?

Indeed, as from Jan 1st 😉

Don

[don]

Re: Fridge-freezer won’t freeze in cold weather – why?

Hi Brian

This is an ongoing issue every winter with fridge freezers either in sheds / garages or unheated conservatories. In your case as it’s technically outside the only thing you could do in this instance would be to bring the appliance indoors during the cold spells.

A full article here in our advice section explains the issue in greater detail.

HTH 🙂

Don

[don]

Re: Bosch Engineer Says Faulty But Is it?

laurenceuk wrote:

I then selected each program in turn (clockwise round dial) and the results:

Cottons 30-90 deg selection min delay 3hrs
Mixed load 40 selection min delay 3hrs
Super quick selection min delay 1hr
Rinse spin selection min delay 1hr
Drain selection min delay 1hr
Wool selection min delay 1hr
Delicates selection min delay 1hr
Easy Care selection min delay 2hrs

These appear to be very definitely programmed.

My Question – is this a fault or was the engineer wrong?

Laurence

I just fired up a WAE28367GB the 1400 spin version and yes the delay times are as you quote so your machine is is a good one.

Perhaps Bosch have changed the spec on the delay but not updated the instruction manuals.

HTH 🙂

Don

[don]

Re: Oven Table

Hi Tony

If you type workmate into the advanced search option there are quite a few threads worth a read. IIRC there were some alternative bits of kit around, some of the guys had even fashioned things themselves in order to work on built in ovens.

Don

[don]

Re: Miele K3212s

Hi Geoff

From the info I have gleaned this afternoon from this Miele thread the part number should be on the stat, it will start with either 4989…. or 4501… as there are more than 2 versions.

Don

[don]

Re: Miele W528 Prestige

Hi

There are multiple versions of that board with various software releases.

Checking with our local Miele service agents they say “all Miele parts have the part number stamped on them” so using that theory your module part number will start 5879… and should be easily visible. Let me know if you find it just to prove the info correct.

Note to self to remember this little gem 😆

Don

[don]

Re: UKW 2.0

Attachments are working fine as well 😀

Don

[don]

Re: Miele W528 Prestige

Hi Merv

Two modules in this one. Not sure if both are behind fascia or not. Can you let me know from the attchments which you require and i’ll let you have the part number.

Don

[don]

Re: UKW 2.0

I get the same very tiny box just like Mark on both IE and Firefox.

Don

[don]

Re: raw washing for sale

Hi

A recent thread on this very subject here

There is more on the site if you type raw into the advanced search option.

Don

[don]

Re: 1200 spin washing machine 30/40 degree

Hi pearlstar

There are only two that I am aware of in a slimdepth these days other than the Zanussi are the Bosch WLX24164 and the Indesit IWSC5125 The Bosch while a tad more expensive would be the way to go IMHO.

HTH 🙂

Don

[don]

Re: edit my own details

Hi funbobby

Indeed it does crash, I’ll drop Ken a pm to let him know.

Don

[Author]

Posts