Forum Replies Created
-
Posts
-
Re: C60EKK single circuit energy regulator
Hi
If it is that version Partfinder says it’s C00260993.
DonRe: C60EKK single circuit energy regulator
Hi
As you can see there are two different versions and the regulators are different.
Which variant is yours?
Don
ps Moved you down to trade spares 😉
Re: Water Inlet Valve Location – Brandt VI600BE1
Hi
A parts explosion is what is says on the tin. Sometimes the part you are looking for is in the right area and sometimes not.
The easiest way of locating the valve is to slide the dishwasher forward and follow the fill hose to where it screws onto the valve, 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time they are at the bottom of the appliance. You will then have to work out for yourself how to get at the valve in order to replace it.
Your ip address suggests you are posting from France, if I Google your model number the only references are leading me back to France and the text is in French.
HTH
Don
Re: Oven igniter won’t stop clicking – cannon 10750G
Hi
Kaibart is quite correct in his recommendation of a Gas Safe engineer to carry out this repair on a gas or dual fuel appliance.
There is a link at the top of this forum which explains the reasons why. Click this link for the page.
Don
Re: Beko, Fridgemaster or White Knight fridge freezer?
Hi
Out of those three it has to be the Beko every time. They always represent good value for money and spares are readily available at a reasonable price.
Don
Re: Integrated fridge freezer 60/40 or 70/30?
Hi
I reckon a 70:30 fridge freezer was in there before.
Just to be on the safe side I would those door measurements and visit a reputable kitchen company who should be able to confirm my thoughts.
Don
Re: Integrated Fridge Freezer
Hi
Can you post up the make and model number of the existing appliance please?
It’s usually found behind the salad bin(s) in the bottom of the fridge section.
Don
Re: miele PT7136 vent hose
Hi
Have attached screenshot of he pars breakdown, as you can see there are three different vent sizes and four different model numbers PT7136, PT7136OS PT7136 Plus and PT7136 Vario.
One of those does indeed take the standard 100mm diameter, I would measure the old one and go from there.
Don
Re: Admiral Cap Plus top loader run with just cold water?
Hi
I cannot see a heater on the circuit diagram or in the parts list.
This appliance has the two valve fill system so you may need to have both connected to the cold supply in order for the machine to work correctly.
Don
Re: Diplomat Oven ADP 3242 replace cooling fan
Hi
An email to our shop spares@ukwhitegoods giving them the model number they will be able to supply the correct one.
It does sound like you have the wrong one and that word “compatible” does have a lot to answer for 🙂
Don
Re: Lights/Buttons
Hi
The white light was probably green when the freezer was new.
So the colours are yellow = fast freeze ideal for freezing down large capacities, this will keep the compressor running permanently until you switch it off.
Red = warning temperature light.
White (which was probably green when the freezer was new) indicates the mains to it is on.
DonRe: Matrix MS002ss/1
Hi
According to Connect it’s a Delonghi made oven and the part no. is 079008001f in the shop here one by looks of it.
Don
Re: What’s the meaning of clockwise or anti-clockwise motors
Hi
What’s the make and model number of the hood to start with? Are you sure the motor(s) have failed?
Don
Re: SHARP ES-GD75B Washer/Tumble Combo – Dirty washing
Hi
Wherever you purchased this from “a few weeks ago” it should have come with the manual.
If the machine you purchased is an ESGD75W you first off need to register for your five year parts and labour guarantee on this site http://www.warrantysolutions.co.uk/shar … /index.php
Once registered I would not put any additives in as previously suggested but would log a call for a service engineer to visit to check out the smell assuming your waste pipe/ trap etc is nice and clean.
HTH
Don
