[don]

Re: American Fridge Freezer Brand

My choices would be;

Sub 1k Beko and Daewoo over 1k to 1.5k Fisher Paykel

Don

[don]

Re: American Fridge Freezer Brand

Hi
There is a good read here which should help to point you in the right direction.

Don

[don]

Re: PCB needed cooker hood extractor

Hi

Nothing from the usual sources You could try ringing them direct http://www.vectaire.co.uk/cookerhoods

Don

[don]

Re: GU15DA50GB Siemens Freezer – No Defrost Outlet?

Hi

I apologise for what is going to be a long post :eeek:

First of all to answer the OP and your own question the instructions used for both of your appliances is a generic one used for all Siemens freezers. You will see from the attached picture you only get a feature where that section has either a dot or a reference to it.

In the case of the thaw water drainage this particular model does not have this function.

As this appliance is a self defrost system the defrost instructions again on the attached picture is generic across all non frost free freezers irrespective of brand.

So you are not missing out on anything and your freezer is a manual defrost as per the attached.

HTH 🙂

Don

[don]

Re: Aqua stop and Y fitting

Hi

All the Bosch freestanding do have the aqua stop. I have I believe found a Hotpoint SIAL11010P which does not appear to have the aqua stop.

If you cannot have the plumbing altered then it’s probably going to be the only option if the Hotpoint does have the stop.

HTH

Don

[don]

Re: Aqua stop and Y fitting

Yes it will fit onto the existing dishwasher hose and the aqua stop 🙂

Is this a freestanding or integrated appliance.

Don

[don]

Re: Aqua stop and Y fitting

Hi

Yes, there is this connector.

But before you go down that route and introduce another potential joint which could lead to a possible problem in the future there may be an alternative solution.

Not all dishwashers have the aqua stop some still have the traditional hose. Are you looking for a freestanding or integrated dishwasher? Is it to be a full size or slimline ? What sort of budget?

Don

[don]

Re: Hpt Part no C00260750

Hi Lawrence

I have been reliably informed that you will need a high end, and low end adaptor plus the smart card in order to programme that board.

If you know a local Hotpoint engineer he may be able to help 😉

Don

[don]

Re: Which Bosch washing machine?

bobdog wrote:Thats fine, thanks for your help i’ve ordered the 28390!

No worries, glad to help 8)

Don

[don]

Re: Smeg DI6012-1 cover door fitting

Hi

Here you go straight from the Smeg site 🙂

Don

[don]

Re: Which Bosch washing machine?

Hi

very little from a quick look.Main one being the 28390 is a quieter machine as it has EcoSilence Drive.

The following links should allow you to compare.

https://adcocks.co.uk/product/bosch-wap … ine-white/

https://www.hughes.co.uk/product/kitche … wap28378gb

HTH

Don

[don]

Re: Lofra cooker door seal

Hi

Our own spares shop should be able to help. Send an email to spares@ukwhitegoods.co.uk don’t forget to quote the make, model and serial number.

Don

[don]

Re: Smeg DI6012-1 cover door fitting

Hi

The installation instructions and the template can be found on the Smeg site here downloadable as well 🙂

Don

[don]

Re: Zanussi fridge freezer 70 30 frost free

Hi MEB

One of the better builds out there, you could do a lot worse 😉

Don

[don]

Re: Brandt Microwave transformer part number please

Hi Tell

Your’e best bet is http://www.magsells.co.uk/ give them the model and transformer details.

Don

[Author]

Posts