Forum Replies Created
-
Posts
-
Re: Replacing integrated fridge freezer with free standing
Hi
Just make sure the aperture you are left with is square so as to take the 59.5cm width of appliance. Don’t forget the depth is deep at 66.8cm on that machine.
Don
Re: Thorn double oven energy reg.
Hi Mike
Original part no. 121581 Diamond H 21ER.1 UKW shop here may be able to help.
Don
Re: Replacing integrated fridge freezer with free standing
Hi
The easiest way of doing it is to go for a Hotpoint RFAA52 or the frost free version FFAA52 and slide it straight into the existing carcass.
Or yes you could tear out the carcass and put a 60cm wide appliance in there. You will have to dispose of the old carcass yourself though.
HTH
Don
Re: Double or single oven?
Hi
A good kitchen fitter would be able to drop the oven shelf down to a level comfortable for yourself while at the same time being safe.
On the grill topic you could always have a built in double oven that has a grill in both cavities that way giving you loads of grilling room.
Don
Re: Fridge sharing wall with airing cupboard
Hi
The water tank will be lagged I assume? If so 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the heat will be retained within. On the Fridge side 9cm is more than enough for door opening and for ensuring an air flow around it.
You then have the wall in between which should keep the two zones separate temperature wise. If the tank wall did become warm you could always fit a reflector layer on the wall.
HTH 🙂
Don
Re: Bosch WAK28260GB/11 motor bearings shot
20 odd cycles per week!!
I think you need to re visit those sums Martin 😉
Don
Re: AEG T75280AE dryer
Hi
Martin is technically correct the known error codes thread is for submitting them although there are a few “other posts” in there.
Your enquiry should really be posted as a separate thread in the trade tech forum.
I have split the topic,moved your post to a new thread and deleted the “other comments” between yourself and Martin.
Good luck with your enquiry.
Don
Re: HOOVER T/LOADER HANDLE – HTC243
Hi
If you have LBHTC243 UK code 31000162 (as there are several different versions) then it looks like it’s going to be either no. 34 lid 80051484 or upper frame no 86 80049156 looking at the explosion.
Or I could be wrong of course!
Don
Re: Family washing machine
Hi
If you are washing 6-7 loads per week now with two young children the loads are only going to get more as they grow older. Lets say that grows to 7-9 per week that’s about 2.5 times the average weekly usage :eeek:
You’re Beko as suggested by Martin is not going to take that sort of hammering to be fair. I would still go with a Bosch but not the one you suggested but the WAP28378GB this range of machine is a great workhorse just what is needed for a growing family.
HTH 🙂
Don
Re: TCFM80CGP Mains filter
Hi
Spares group here might be worth a shout as they are showing in stock. Phone call first may be the way to go 😉
Re: cuisina DW007 dishwasher manual
Hi
I have deleted your duplicate post and moved this one from washing machine to dishwasher forum 🙂
Cuisina are no longer trading I’m afraid, the only help you may get one is if someone reads this post and has a set of instructions. That aside as you have already found it is a lost cause.
Re: miele appliances
Hi Andy
You could try DAD appliances at Tewkesbury 0844 854 6715 or try a local Miele stockist who may be able to help.
Don
Re: Spam
Not really spam but related to a degree 😉
Whilst sunning ourselves last week in Turkey I tried to log into UKW however despite using different electronic gadgets and secured wi-fi or 3G I was unable to see the site which made my wife very happy lol.
Just a question have all Turkish ip addresses been banned?
Don
