Forum Replies Created
-
Posts
-
Re: F-Gas Certificate
If you are just doing R600a, and only domestic units you dont need F gas.
Sent from my iPhone
http://www.kitchenkitsw.comRe: danfoss compressor
Yes this is true, but if you want to be sure and you are replacing a R600a pot use one with as near the same wattage, if you dont and use a compressor that is too powerful them it can cause the unit to not correctly cool down and not meet with the manufacturers energy ratings and design.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Washing machine rentals.
Please remember that to rent machines out you need to have a consumer credit liscence, with out one you will be breaking the law.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Hotpoint WMUD843 not moving on
Oh dear, you seem to go off on one dont you, simple fact us it has plenty to do with us as you posted on here looking for help, as its a forum you will get a varied response and you choose which ones you respond to. Maybe you should start your own repair business, you would be very successful.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Hotpoint WMUD843 not moving on
I rest my case, Idiot.
Our experience is based on known faults that occur, not faults that are created by idiots trying to redisign appliances. You chose to post here and now you are upset because i dont agree with your meddling and i for one dont want to give you advice on altering the manufacturers settings or worse still on how to electrocute yourself. Idiot.
Sent from my iPhone
http://www.kitchenkitsw.comRe: danfoss compressor
I think you need to be a bit more accurate with R600a
Sent from my iPhone
http://www.kitchenkitsw.comRe: danfoss compressor
I use to do the above when it was R12
Sent from my iPhone
http://www.kitchenkitsw.comRe: AEG 72640 washer
I think the pump and filter housing has changed a few times over the years, if the filter seal is still intact but out of shape try dropping it in to a mug of boiling water and it should return to its original shape, failing that you will have to change the pump and filter housing complete.
Sent from my iPhone
http://www.kitchenkitsw.comRe: danfoss compressor
Shouldnt you only be concerned with the wattage for R600a compressors?, when doing a comparrison.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Hotpoint WMUD843 not moving on
It matters not one jot which way it spins, Well i have come to the same conclusion, one word. Idiot!
Sent from my iPhone
http://www.kitchenkitsw.comRe: Hotpoint WMUD843 not moving on
You say you fixed the problem, but there wasnt a problem to start with, you have wasted so many hours of your life almost akin to reinventing the wheel! Its a mad mad world!
Sent from my iPhone
http://www.kitchenkitsw.comRe: Hotpoint WMUD843 not moving on
What makes me laugh is the fact you broke your own machine, call engineers for their rip off fees and then post on here for our help, i have one word for you. Idiot!
Sent from my iPhone
http://www.kitchenkitsw.comRe: BOSCH WTA 2000 Tumble Dryer
I say basic because if your not sure of this basic stuff should you be messing with it?
Sent from my iPhone
http://www.kitchenkitsw.comRe: cooker cable sizes
Because of diversity, some terminals wont take a 10mm cable. Look in the manufactures instructions and they will tell you what rating is needed, it will be either 45amp or 32amp, or 6mm or 8mm
Sent from my iPhone
http://www.kitchenkitsw.comRe: Differences between the newer Hotpoint Washing Machines
Different specs for different customer needs, some parts will be the same and the manufacturer will optomise for different load capacities, just because the load size quoted is more dosnt mean the drum is bigger, you can only go so big as the physical constraints of the exterior cabinet. That is also the reason for programming the main board so it knows what the spec of the machine is.
Sent from my iPhone
http://www.kitchenkitsw.com
