EFS

Forum Replies Created

Viewing 15 posts - 226 through 240 (of 886 total)
1 2 3 … 15 16 17 … 58 59 60
  • Author
    Posts
  • February 16, 2014 at 11:57 pm in reply to: Rent girl…ever felt had.. #409637
    EFS
    Participant

    Re: Rent girl…ever felt had..

    I picked up a lucrative arrangement with a top end letting agent three years ago after the guy they were dealing with was caught out being less than truthful.

    So be careful out there 😉

    Steve

    BTW I never got felt by a rent girl either 😆

    February 6, 2014 at 6:38 pm in reply to: Servicenet Recruiting Engineers #409087
    EFS
    Participant

    Re: Servicenet Recruiting Engineers

    Is that part time ❓ ❓

    January 31, 2014 at 8:17 pm in reply to: Whirlpool oven AKP262/ix #408719
    EFS
    Participant

    Re: Whirlpool oven AKP262/ix

    Lol 😆

    January 31, 2014 at 6:57 pm in reply to: Whirlpool oven AKP262/ix #408717
    EFS
    Participant

    Re: Whirlpool oven AKP262/ix

    This is a bog basic fan assist oven with mechanical thermostats and the only function of the display pcb is clock and auto cook.

    Couldn’t justify the three figure retail cost of the pcb against the purchase price of the oven so I bypassed the pcb and the customer is cooking again.

    Had to disable the cavity lamp though which wouldn’t turn off.

    Stupid Whirlpool spares prices once again!

    Steve

    January 31, 2014 at 1:08 pm in reply to: Whirlpool Oven AKP203/IX Showing _ _ _ C #408634
    EFS
    Participant

    Re: Whirlpool Oven AKP203/IX Showing _ _ _ C

    Must be an epidemic.

    I just posted the same query this morning.

    Steve

    January 31, 2014 at 12:09 pm in reply to: Whirlpool oven AKP262/ix #408715
    EFS
    Participant

    Re: Whirlpool oven AKP262/ix

    Ok Here goes.

    12nc 857726238500 Customer says display is showing —C.
    Not been yet but customer now tells me that they did a DIY repair and fitted an element :rolls:

    Steve

    January 26, 2014 at 5:59 pm in reply to: Whirlpool American Fridge Freezer broken down – help! #142629
    EFS
    Participant

    Re: Whirlpool American Fridge Freezer broken down – help!

    PC boards can be repaired AND re programmed for any model regardless of production date and original settings.

    Steve

    January 8, 2014 at 9:33 am in reply to: Dishwasher rust hole repair? #407290
    EFS
    Participant

    Re: Dishwasher rust hole repair?

    This will work but will need some dismantling as you need access to both sides of the hole.

    Drill out the hole to the size of a pop rivet and remove any swarf and clean with emery cloth.
    Plug the hole with a stainless pop rivet with stainless washers both sides and sandwiched with epoxy putty or Araldite.

    I did this to my daughter’s Siemens dishwasher three years ago and it is still holding up.

    Good luck

    Steve

    December 25, 2013 at 8:10 am in reply to: American Style Fridge Freezer condenser motor wiring #406209
    EFS
    Participant

    Re: American Style Fridge Freezer condenser motor wiring

    Looking at the refrigerator from the front the air is drawn in through the right hand side of the grille and blown out through the left provided that the rear cover is fitted.
    Hope that helps.

    Steve

    December 19, 2013 at 12:28 pm in reply to: Any Central Heating Engineers on here? #406574
    EFS
    Participant

    Re: Any Central Heating Engineers on here?

    Mine does this occasionally and comes back to life if I give the motorised three way valve a gentle tap.

    Steve

    December 10, 2013 at 7:29 pm in reply to: NAC (ADVERT THREAD: IGNORE IT) #400798
    EFS
    Participant

    Re: NAC (ADVERT THREAD: IGNORE IT)

    Time to give Matt Allwright a call. 😈

    December 3, 2013 at 9:43 pm in reply to: I resent Landlords trying to push me #405277
    EFS
    Participant

    Re: I resent Landlords trying to push me

    gandh1 wrote: I hope hes confident enough the phial is long enough and that his knob will point the right way 😉

    Oooh! Matron

    December 3, 2013 at 8:46 pm in reply to: Hose clamps #405675
    EFS
    Participant

    Re: Hose clamps

    Carpenter’s nail pincers work for me.

    Two quid tops!

    Steve

    November 25, 2013 at 7:13 pm in reply to: EEE safe email. #401833
    EFS
    Participant

    Re: EEE safe email.

    Or try and sell you a time share 😉

    November 20, 2013 at 7:04 pm in reply to: What Made You Walk #404798
    EFS
    Participant

    Re: What Made You Walk

    A few years ago when I was doing a stint in East London I went to a job in Tower Hamlets.

    Pulled the washing machine out and what looked like a carpet of cockroaches came running out in all directions like a scene from a George Lucas movie.

    But I didn’t walk.

    I ran!

    Steve

  • Author
    Posts
Viewing 15 posts - 226 through 240 (of 886 total)
1 2 3 … 15 16 17 … 58 59 60