[Electricmalc]

Re: Hoover AC90-001 washing machine spin problem

Pleased to say new tacho coil, and machine works fine now.

Resistance of new coil 157 ohms, also measured voltage from new tacho coil turning the pulley as fast as I could by hand .8v AC

Malc

[Electricmalc]

Re: Where to buy Helkama Forste spares in Uk?

Could try emailing them

e-mail: info@helfo.com

Malc

[Electricmalc]

Re: panosonic microwave

QER tel no 01900 67913 enquiries

Or 0800 2798912 for orders

Sorry can’t help with price of pcb.

Malc

[Electricmalc]

Re: Hoover AC90-001 washing machine spin problem

Couldn’t get any resistance reading across tacho coil at all.
Tried measuring voltage across tacho while spinning armature, there is some voltage but difficult to measure with a digital multimeter.

Have ordered a new tacho coil

Malc

[Electricmalc]

Re: Hoover AC90-001 washing machine spin problem

Thanks for all te input on this one. Will be returning to machine and will carry out further checks, and will post back here

Cheers

Malc

[Electricmalc]

Re: Aeg LW1259 Washing machine, Drum bearings question.

Thanks very much Tell for your help. I have an older edition of the CD and this machine is not on the CD, suppose I will have to get round to getting an up to date one. 🙁

Thanks again

Malc

[Electricmalc]

Re: Ok I give up. Dyson DC04

Yes Phidom exactly what I am going to do. 😀

I did manage to get the switch button out after trying for about 15 minutes with different bent nails and strong sewing needles, seems like the idea of drilling a hole in the button in the right place to get at the screw is the best way to go, then fit a new button.

Anyway job done, and a wiser man, thanks for your postings.

Malc

[Electricmalc]

Re: Ok I give up. Dyson DC04

Cheers for that, didn’t see the little cut out in the button, will try again in the morning.

You live up to your name (Lightning Electrical)

Thanks for the quick reply, your first too. Welcome 😀

[Electricmalc]

Re: Falcon dual fuel range spares

Thanks Eddie

Will see whats wrong tomorrow.

Cheers
Malc

[Electricmalc]

Re: Neff dishwasher S4466W0GB/07 FD7802 Fault code

No water in base, but overfill float was stuck at the top of the float chamber due to scale round the sides of the chamber and on the float.
Rather than strip down the water manifolds, which looks to be a pig of a job, and may well cause a leak on reasembly, not having any new O rings, Gave the chamber and float a squirt of Viakal kettle de scaler. Then waited a while for de scaler to work. 😆

Having got rid of the scale, set machine on a wash, but observed the water was not entering the sump quick enough, causing the overflow float to lift, but not quite enough to operate the overflow microswitch.

Cleaned out hose going to sump, usual gunk had collected in the pipe, retested machine all ok.

Malc

[Electricmalc]

Re: Neff dishwasher S4466W0GB/07 FD7802 Fault code

Thanks very much Martin, will go see tomorrow. 🙂

Malc

[Electricmalc]

Re: Smeg chimmney extractor F3 90 INOX SL.

Caple do a F1390 island chimney hood
Search on google for Caple F1390 to find a picture

Malc

[Electricmalc]

Re: Phillips AWB 088 PH Washing machine, an oldie.

Just to say thank you for your help with this one.

Customer decided not to repair machine, daughter giving him her old one, and buying a new one for herself. 😯 😯

[Electricmalc]

Re: Motor Bracket for a Blomberg W/M 1501AA

Yes quite right, was the motor end frame. Motor available special order from Electrue, but customer thinks it may not be worth repair.

Thanks all

Malc

[Electricmalc]

Re: Motor Bracket for a Blomberg W/M 1501AA

Thanks all for your help

I was just checking re the availability of parts before going to job 1st one in the morning.
Customer had taken back off machine, and told me the motor was hanging down due to a broken motor bracket 🙄

Malc

[Author]

Posts