Forum Replies Created
-
Posts
-
Re: I am sure it is easy when you know how HPT WF541P
Went back today, and within 3 minutes sussed out I had the latch spring legs in the wrong place. Never too old to learn, thanks for your replies.
Malc
Re: Old AEG B2.88D 611563951 Built in oven
Now I remember it, thanks both for your help, looks like I have one in the van, good time to get rid of it, (The element not the van) 🙂
Malc
Re: AEG built in fridge with electronic control (A headache
No they didn’t bother with the repair, so can’t say if the board would have cured the problem.
Mechanical stats used to be easy and cheaper to replace, 😥
Malc
Re: Bosch WFT8030GB/02 FD7509 error code info please.
Thank you Greg
The strange thing is that the machine will go through most of the wash, then throw the error up, and the dryer is not selected either.
Would have thought the component checks would have been at the start of the program?
Thankfully the ntc is not too expensive so will go with that as a start.
Many thanks
MalcRe: Bosch SGV4313GB/13 Dishwasher, problem after fitting new
No sign of any blow on module, checked that b4 ordering new.
But will have to go back and check heater etc anyway 🙁If I get it working will post back later.
Thanks
MalcRe: Bosch SGV4313GB/13 Dishwasher, problem after fitting new
Hi Greg thanks for coming back on this problem. 🙂
Have just phoned customer, on a Sunday too 😆
They have confirmed 4 programme buttons on dishwasher.
Both the old and new control boxes have 5 switches on them, the buttons on the dishwaher are like a plastic membrane that fits on the control box, just a push on fit, so cant get that wrong.
The control box obviously fits several models as the instructions say
“in the case of appliances with 3 programme buttons, the control box must be programmed prior to installation in the control panel frame”
That is because you need to depress 4 buttons to initiate the coding, if you fit the box to the frame of course you only have access to 3 buttons.
I am sure that if the heater had failed before the control box gave up, customer would have noticed. It only took them one wash after I fitted the control box to realise no heat.
I just didn’t want to go back and pull machine apart looking for no heat fault, if it may have been the coding wrong.
I did ask customer to try a different programme, still no heat. 🙁
Malc
Re: Bosch SGV4313GB/13 Dishwasher, problem after fitting new
Thanks Martin
The machine has 4 “programm” buttons, intensive,normal,eco,quick wash.
So the coding to get these programs should be code 0 or 1 by the instructions, I coded it to 1, but as I said ,why two codes that apparently achieve the same result?
MalcRe: Bosch SGV4313GB/13 Dishwasher, problem after fitting new
Martin
Date code 7905
Nothing on instruction sheet mentions a ‘sicasym’ pump system
Malc
Re: Cookers model 600105 door hinges
Thanks Chris
Masterpart did get back to me, and customer has accepted quote, so will be ordering.Malc
Re: Cookers model 600105 door hinges
Andy
I emailed Masterpart mid day today for price.
Have had no reply. 😯
Malc
Re: Going back a bit, anyone remember ?
Thanks Easimark
How did you find that on Connect
And another rip off price for a control knob.
PS You must buy more from connect than I do, just over £1.00 more to me. 😥
Malc
Re: Hotpoint WF320, strange fault. To me anyway.
Many thanks for your input Helo, appreciate it.
Malc
Re: aeg tumble dryer
Hi Harley
Just had a quick look at the wiring diagram and manual on distriparts, and all I can find is exhaust duct stat operates at 72c, it doesn’t say if it is normally open or closed. The heater wiring plugs into a socket in the back of the t/d, could possibly be a suspect.
I am not familiar with the machine so will have to wait till the lads on the forum get back from their long day in the field. 😆
Malc
