[Electricmalc]

Re: hotpoint df23 dishwasher overfilling

Had one this morning, and yes it was the chamber to sump hose full of gunk.

Easy job for a change.

Malc

[Electricmalc]

Re: Indesit FM20KCIX ser no 306160107 oven

Just to say Electrue have confirmed C00090770 is the correct part no. Have put one on special order 🙁

Thank you all

Malc

[Electricmalc]

Re: Whirlpool dishwasher ADG993/1 WH 8542 993 15110

Result I hope.

Customer has used the DW once, since I cleaned out the Diaphragm as suggested by Clive. Had to take it right out of the machine, and remove the plasic grid which protects it, twas full of crud.

Hopefully it will continue to function properly.

Thanks to all for your help, I have learnt a lot regarding this machine.

Malc

[Electricmalc]

Re: Indesit FM20KCIX ser no 306160107 oven

Thanks Dave
Yes I see it now like you said.
Will take it from there with Electrue on Monday.
Still looks like I will be doing a temporary sticking job, as it’s a special order.

Oh for an easy life, only another 9 years to go 8)

Old…. Malc 🙂

[Electricmalc]

Re: Indesit FM20KCIX ser no 306160107 oven

Thanks iadom for that information.

Searching on Electrue Connections, if I enter MER090770 is doesn’t come up with anything.

Am I being stupid, or maybe they dont have that part number on their system. ❓

I’m thinking if all else fails, I will be resticking the old glass back in the old door.

Malc

[Electricmalc]

Re: Indesit FM20KCIX ser no 306160107 oven

Thanks Dave. 30mm out ??.
There is also a slot and two holes, one each side of the slot, at the top of the 075055 inner panel, that does not exist on the original, all the grease and crud will go down this slot and sit in the bottom of the door.

I suppose the problem could be that somebody has packed the wrong part with the right part no. 😡

Malc

[Electricmalc]

Re: Whirlpool dishwasher ADG993/1 WH 8542 993 15110

Thanks Brian. Have mailed you.

[Electricmalc]

Re: Whirlpool dishwasher ADG993/1 WH 8542 993 15110

Thank you both for your replies, will check the two out asap, the job’s only just down the road thankfully.

Appreciate your input

Malc

[Electricmalc]

Re: Out of balance detection on Indesit WG1234T W/M query

Just to say it was the module after all, so a reasonable price repair.

Thanks

[Electricmalc]

Re: Changing the interior light in a AEG Dishwasher.

Thanks Farmboy, I didn’t think it was going to be that easy, thanks for info, will see tomorrow when I get to job.
A very good point re why have a light, 2 reasons I guess, customer says in the handbook it says to call service dept to fit new lamp when it fails, and also gimmicks sell machines, youve only got to look at dyson cleaners.

Malc

[Electricmalc]

Re: Out of balance detection on Indesit WG1234T W/M query

Thanks Lads ?

Will return to job after customer has tried with a more “Balaced load”. Just to see what happens.

Malc

[Electricmalc]

Re: Neff H7871 combi microwave

Had one once where there had been a small spot of arching on metal frame that the inner door glass fits in to, causing a hot spot that shattered the glass.

Malc

[Electricmalc]

Re: Smeg DW1710E1 Dishwasher fault code diagnosis please.

Thanks Chris

Is there any way to put the machine in to a test mode ??

Malc

[Electricmalc]

Re: WANTED DE6744S ZANUSSI MAIN BOARD HORIZONTAL BOARD

Part no dst1525785133 priced at £69.83 +vat and shown as in stock at Electrue. According to my computer.

[Electricmalc]

Re: Zan D/W 911888011

Nothing on TDS CD about the information you require, other than the information is on TESS 🙄

Malc

[Author]

Posts