Forum Replies Created
-
Posts
-
If its a vt9 an only to wires try connecting on pin 4 and pin 6
Pin 3 will be permantly live and is only a light connection.
Pin4 will be live
Pin 6 will be compressor feed.At the moment if you are using pin 3 & 4 it will run all the time as the thermostat will not let the unit cycle.
The reason is it can be replaced.
You will to find where the sensor is in the back wall.cut it out and fix new one in then using fix and foam reseal the area and using silver tape to seal membrane off.
When I worked at EAC they had to be done as per GIAS instructions very messy though and in time would more than likely insulation would breakdown at the point but then out of any warranty.
You do need to pay duty on it
As soon as it goes into your tank its fuel.
There was a bloke on my local bbc news who did just that and the tax man got him.
i hope i can learn the preying mantess position in yoga
But how can you break out in so much sweat chasing a Mii let alone press ups.
its got its own on board memory so like me didnt know this and purchased a seperate sd card.
If you go over its internal memory card it the shouls the overspill on to the external sd card.
If only I had known that saved some money for another game.
Just got the Wii Fit. Im so out of shape. A must have.
Can you hear the fan running when both doors are shut.
if the answer is yes door switches working correctly.
Can you ghear the fan running when both doors are shut.
if the answer is yes door switches working correctly.
DE IS DRAIN ERROR
BUT
dE IS DOOR OPEN ERRORCE IS MAIN PCB FAULTY OR SHORT CIRCUIT IN STATOR ASSY
LE LOCKED MOTOR
Lucky Goldstar
It seems running on hot and cold water is atrting to be a thing of the past.
Alot of machines are now running on cold water only direct from factory.
In a metre of pipe is a litre of water so with the super energy rating we are wanting now the amount of water to wash has greatly reduced so unless ther machine is next to a kitchen sink and you have just ran the hot water to the sink the chances of any hot water let alone tepid water will be quite small so it will heat it any case.
I have always beleived that the soap powder is more efficient when its cold water fill.
The area I am in whirlpool cover it on behalf of maytag.
I have tried to get work from maytag only to be told the local whirlpool company has the calls.
On certain products thay have a 5 year parts warranty only.
As they use decent quality compressors I always wonder is it the condenser fan that is not strong enough moving air? So that the compressor trips out.
