[fasetester]

Re: no beep beep

thanks for the reply dr drill dont think it does it the third one i tried fasetester. 🙂

[fasetester]

Re: no beep beep

it just annoying why it wont work martin fasetester 🙂

[fasetester]

Re: no beep beep

thanks guys i am not looking to buy was looking to know why it wont work. when replaced with normal reversing bulb. it will light ok but not make a sound it will make a slight crackel.

it will only work on 9v battery thanks fasetester 🙂

[fasetester]

Re: no beep beep

the bulb with the built in beep beep when reversing light comes on tim. fasetester 🙂

[fasetester]

Re: shower replacement

hi phil the triton t802 electric shower can be fitted left or right connection the connection swivels and if your electric is on the wrong side or short you get a extction cable as well hope this helps. fasetester 🙂

[fasetester]

Re: indsit dishwasher

the latest indesit came to repair dishwasher said it was the control card pcb. will have to order one back next week.fasetester.

[fasetester]

Re: Happy New Year !

happy new year all at ukwg. and thank for your help fasetester 🙂

[fasetester]

Re: indsit dishwasher

thanks martin jess mike mark keith for all your help. the cust had bought a lot of appliances. from the same shop so i told him to go back and complain.

about the dishwasher so indesit is coming out to look at it on wednesday i was looking on ebay the oteak clips are on their but the are stainless steel at £10 not counting postage

is their any where you can buy a assortment of hose clips if you are on a repair and come across these oteak clips what do you guys replace them with. thanks fasetester.

[fasetester]

Re: indsit dishwasher

thanks mike for your reply when the are uncliped can the not be reused. it shows a nipper like plyers for reinstalling them. some of the hoses you cant get a normal hose clip on .

is their no one on ukwg has worked on one of these dishwasher and can help the last thing i want is to break something by forcing it.

is their any one knows how to reset this dishwasher. if i cant sort the problum the cust may go elsewhere to try and get it repaired.

i repaired a dishwasher before for them then the installed a new kitchen and a crap dishwasher. it is only 2yrs old if the dishwasher had a problum should it not flash some of the program lights.

their is engineers reading this and thinking if i was repairing this dishwasher it would be up and running come on guys the engineers that have worked on these dishwasher before fasetester 😳

[fasetester]

Re: indsit dishwasher

thanks mike for your reply the reported problum was stopped at end of cycle. did not empy water then the removed all the water.

then when the went to do another cycle would switch on can select all the programs close the door nothing. if the sump switch was faulty would it cause this. or stuck what sort of reading should i get from sw.

how do you remove the water valve on this and the panell under the door .

is their any indesit engineers have come across this is their some kind of grips for removing and replacing oetiker stepless ear clamps or how does other engineers remove and get them back on. and where is the best place to buy them. thanks fasetester 🙂

[fasetester]

Re: indsit dishwasher

thanks jess anti flood no leaks bone dry as i said switches on ok can set any program lights all light up in turn when selected but nothing else dead no water . i checked the iwms like new no staining their is a small switch on iwms.

i removed the connection cleaned connections getting reading on meter i think it is a pulse counter. the only thing i noticed between the terminals

their is a spec of brown the size of a pin head like rust i dont know if that means any thing.

would the sump sw stop it from filling what sort of reading should i get from it .

i know the pcb are not good on indesit the cant be blamed for every fault i was thinking did i miss something what do you think adom thanks fasetester.

[fasetester]

Re: indsit dishwasher

thanks jess for your reply the drain is under the sink connected in with the sink. it is draining ok.

what hoses are you talking about on the dishwasher their is a connection on the sump how does it work .

another thing i would like to ask is their a tool for removing and fitting the type of hose clips on most dishwasher with the 3 noches thanks fasetester

[fasetester]

Re: indsit dishwasher

martin went to repair dishwasher the problum is that you can switch dishwasher on select program all is normal as you select each program

but nothing happends no water nothing checked door switch soilade pump heater ect was trying to get front panell out at the front where pcb is even when i removed the screws and pushed down on tabs

it still would not move would any indesit engineers give me any help the dishwasher is just 2 yrs old thanks fasetester and a happy christmas to all on ukwg

[fasetester]

Re: washing up liquid in GDA dishwasher

thanks guys for all your help tim it was some job getting my hand in over the heater box lol fasetester 🙂

[fasetester]

Re: washing up liquid in GDA dishwasher

thanks tim should i have to turn the timer to get it to move say heat and empy out you take a flap off under the door and the heater is on the left. you say their should be a over heat stat.

towards the back should i turn the timer to a rince and pump out and make sure all the foam is washed out before resetting stat. and why will the kitchen door not go on it should slot in to the opening at top and bottom. then the woman is saying can i help i am afraid of her getting sliced on raw edge.

the stand over you and watch every move i just seen watch dog that boy is some cowboy he does not even take the machine out to check it out.

then takes the money for a new machine does not deliver machine keeps the money then removes interlock i saw he was in a laundry what did he do their.missed that bit.

[Author]

Posts