[fasetester]

Re: bendix dishwasher

thanks chris where did you send the file to fasetester. 🙂

[fasetester]

Re: bendix dishwasher

thanks guys for the replyies went to repair the dishwasher today. it was air locked turned off the water and removed the fill hose. what causes the air lock it is a tricity bendix eco save model DH102 type 911N81-2F how do you remove the kick plate on this dishwasher. what is the screw like thing with numbers in the front left hand corner for plus the sponge in the far left . thanks fasetester.

[fasetester]

Re: Merry Christmas!

happy christmas to every one and thanks for all the help fasetester

[fasetester]

Re: aeg fan oven element

does any one know thanks fasetester.

[fasetester]

Re: aeg fan oven element

thanks for your reply martin. would these elements fit this aeg oven part no 0e8064 or part no 3570425052. can any one tel me if the back of the oven where you fix the element is treaded holes or plain. 😳 i know i should have looked thanks fasetester.

[fasetester]

Re: aeg oven

hi chris would you know if either will do i dont want to go with the wrong element thanks fase .

[fasetester]

Re: aeg fan oven element

hi guys does any one know which element is the right one. thanks fasetester.

[fasetester]

Re: aeg oven

hi guys could any one tel me is the element for this oven fixed by studs and nuts. or is the fixing plate screws and bolt or does it matter as there are 2 elements with different fixings. but the same size only difference one is studs and the other is not. thanks fasetester 😕

[fasetester]

Re: aeg oven

the model isB4100-1-w have checked it out needs new over heat stat plus fan oven element thanks chris fasetester 🙂

[fasetester]

Re: aeg oven

thanks chris for your reply when the over heat stat is shorted out the fan should run and the oven heat is there any other stats that would stop the oven working. thanks fasetester.

[fasetester]

Re: smeg dishwasher

hi guys what are the chances of the control card being damaged the dishwasher was not pushed in far enought and the door was catching on the kick board. each time the opened it. and the had to keep banging it to get it to work if you press the button and each ligh lights up should the board be ok. i got the screws of the lach the fell out when i removed the panel the whole panel is all cracked. and the lach had broken away from the panel. thank for any help fasetester. 🙂

[fasetester]

Re: smeg dishwasher

went to see dishwasher today door lach broken and control panel. when shorted door switch out got dishwasher to go but would not change program. checked connections seemed ok would the door panel and lach broken have gossed the pcb. and when you take out the screws the whole thing fell apart kitchen door and all. should the not be attched on brackets intergrated appliances. :violent: fasetester 😕

[fasetester]

Re: smeg dishwasher

any pointers from the smeg service engineers. is the pump easy to get at on these dishwashers. and can you get at it from under the door at the frount. thanks. fasetester

[fasetester]

Re: Commercial Dish/Glass Washers.

seamy what do you find are common problums with them are the faults different from dishwashers. thanks fasetester 🙂

[fasetester]

Re: The Dishwasher Thread……..

wel guys do any of you repair glasswashers. fasetester 🙂

[Author]

Posts