Forum Replies Created
-
Posts
-
Re: jackson dishwasher
hi guys is there any thing other than siphoning that would cause the water to trickle out of the sump would the iwms cause that it is not the anti flood the pump is not running it seem to be empying throught gravity thanks fasetester 🙂
Re: jackson dishwasher
martin the pump is not running as if you held the drain pipe down and the water flowed out then when it empys sump brings in the water valve is there any thing else other than the drain pipe siphoning would cause that thanks for your help fasetester 😕
Re: jackson dishwasher
thanks for your reply martin you would think it was siphon. the water is running out and not giving the washer pump time to wash. what would i need to check the pump is not running it is empying throught gravity .martin and how do i get the legs to ajust up thanks. fasetester 🙁
Re: jackson dishwasher
went to dishwasher today even when i have all the screws out the dishwasher will not move. could not get it out. what could be holding it. hi chris me again. when the dishwasher starts a program it pump out then fills for about 20sec. then you can hear the water empying out even when it is switched off. at the wall it does not matter where you put it on the program wash rince ect when you kill the power at the wall and open it the water is empying out. when you pull out the drain pipe not that much water coming out it is not pumping like for over fill or running anti flood . possible that why washer pump is not going. any help please fasetester.
Re: I’ve just done a ‘Gegsy’:(
sorry to hear of you accident martin hope its not to serious and you make a speedy recovery. fasetester 🙁
Re: jackson dishwasher
well guys no one know if i can get in from the front when i was testing the dishwasher after filling there was not even a hum from the washer pump usally if it was jammed or capactor fault you would here some thing i would like to sort it if possible as the have to lift the tiles to get the kick board off the sump inside is like a creda any other help thanks fasetester.
Re: indesit timer spins around
thanks for asking martin the said the will go for new machine. so will have to wait for the next indesit and keep all the info at hand. fasetester 🙁
Re: jackson dishwasher
went to see the jackson dishwasher but could not remove it. the floor tiles are right up to the kick board . it is bringing in water the heater and pump all seem to be working. so problum with washer pump. it is semi intergrated with brown control pannel knob on the right hand side selectes the washes. left hand side knob you put it to start it does the rinceing heating empying. would any one know the rating of the capactor on the washer pump on this dishwasher. will have to go back when the get the tiles removed. dont you just love kitchen fitters. fasetester 🙁
Re: jackson dishwasher
hi martin or pen or old tog has any of you worked on the jackson dishwasher as the seem not to be popular thanks fasetester 🙂
Re: jackson dishwasher
thanks for the reply bobokines what do you mean by a trigger spray head. if that dosent work can you get at the pipe work from the front. as its an intergrated and could be a bugger to get out. would you be able to get a bottle brush into the pipe or is it a small pipe. would that be the most likely cause a blockage would trapped water in that pipe cause it not to fill . is there a pressure stop system on the valve and is there a i w m s type system on these dishwashers. and who made the jackson first one ive come across thanks. fasetester 🙂
Re: Fan oven doesn’t heat, but element is OK
ltdan did your friend find out what the problum was with your oven fasetester 🙂
Re: indesit timer spins around
hi martin have you come to a machine and the customer said it is over filling the machine is a timed fill say you test it on a rinse it fills up then tumbles for a few min the pump then comes in to discharge the water before it has finished it starts bringing in water after you checked the pump for blockages ect and you checked the pressure switch and bottle question ? which would you change first the pump or the pressure switch and why thanks fasetester 🙂
Re: indesit timer spins around
thank tony and martin for the information you try and get the machine going you tell the customer its your pswitch you fit the pressure switch and the machine still wont go then you tell them its pcb or what ever the customer is getting a bit feb up you have committed your time and what ever parts you use then you find your self between a rock and a hard place the customer is not happy that the have to pay as you know some times you test a part and it seems ok say for an example the machine is a timed fill and you check the pswitch and it seems ok the machine is over filling then you think the pump might be running slow and not empying quick enought do you chang the pressure switch and hope it is faulty or do you change the pump first fasetester 😕
Re: indesit timer spins around
wel guys went to see the indesit machine today tryed to reset no joy when a program is selected would start to fill then stop then the timer would start to click around bring in the pump i counted the flashes which were ten pswitch not sensing correctly checked pressure switch seem ok checked connections at switch and module seem ok checked every connection checked brushes in motor pump ect would that mean the board would be to blame what do the indesit experts think or any engineer that would like comment thanks fasetester 🙁
