[franz]

Re: Fagor FI64-b-bt

Thanks K – cust decided to replace machine
Franz

[franz]

Re: FF200EP

order defrost heater – its a new modified heater kit
Franz

[franz]

Re: On/Off switch for Zanussi WDT1085

Johnny – try 50249020004 – picture on connect or qualtex
Franz
(aka Andy C)

[franz]

Re: Indesit IDL500

if water is coming out of wash blades slowly like an ornamental fountain then it’s the wash motor.
Franz

[franz]

Re: Bosch Kgn33v60gb/01

Thanks Simon – will get cust to phone Bosch
Franz

[franz]

Re: Hotpoint DWF70S AL02 fault after fitting drain pump

check heater – although AL02 relates to valve its usually the heater
Franz

[franz]

Re: AEG U7101-4 – TOP OVEN WORKS BUT BOTTOM OVEN & CLOCK

I would also check for a thermal fuse or o/heat t/stat linked to bottom oven before replacing clock. Turn off supply before testing
Franz

[franz]

Re: Connect Prices

£38.42 to me from connect
Franz

[franz]

Re: Bosch Parts Price Rant

Maybe true but the selling price to the sheds was £100 in 2002 – so most of markup is due to curry’s comet etc
Franz

[franz]

Re: Hotpoint BWD129 Fault

Try unplugging all conns from both pcb’s – squeeze plugs to tighten and refit – if this doesnt work then send main board to EMW
Franz

[franz]

Re: hotpoint bwd129

o.k. missed that – try sending board to EMW for testing
Franz

[franz]

Re: hotpoint bwd129

could be a sticky brush – when door locks and nothing else happens – usually brushes or motor
Franz

[franz]

Re: hotpoint bwd129

check brushes
Franz

[franz]

Re: apm6855

thanks spimps – any idea why the ice built up?
Franz

[franz]

Re: Hotpoint WT965a

Drum support – c00117329
Rear half – c00144137

Franz

[Author]

Posts