[funkyboogy]

Re: HOTPOINT ERROR CODE = E30

how bigs the bag,
lol…..
ally

[funkyboogy]

Re: hotpoint bf162 [indesit] dishwasher

also collar under the spray arm comes loose…
ally

[funkyboogy]

Re: indesit f/f TA5FNFS

cheers dave.

ps your postcode map, has taken 30 mins of my day…cheers

[funkyboogy]

Re: Samsung RS21DCMS

cheers,
i get the feeling everyone will be at a sams/ f/f b4 long ,
its good to get the info out there
cheers ally

[funkyboogy]

Re: Hotpoint RFA60 freezing fridge contents

yip it looks like its going to the big recyclye yard in the sky…

[funkyboogy]

Re: Samsung RS21DCMS

i have been reliably informed the front does come of. but as yet have never had the pleasure…
gegsy can you enlighten me…does it come of…

i have heard that the water system doesnt go through the pcb, its straight from the mains….

ally

[funkyboogy]

Re: Hotpoint RFA60 freezing fridge contents

possible lack of refridgerant…..

ie not enough to go round fridge…hence localised freezing in,
without proper refridgeration tools you wont be able to tell…
if its a 600a system it will probaly be a gas leak…and not worth geting into if you dont have system tools.

ally

[funkyboogy]

Re: ZANUSSI FJR1454W

YOU COULD ALSO CHECK RECIRC PUMP..
it might be faulty???

[funkyboogy]

Re: indesit fault

beter still …..RUN

[funkyboogy]

Re: HPT WMA30

i wouldnt even go that far wayne….
remove connectors from pcb…taking care to mark where connectors came from?
unscrew top panel which house the pcb etc…unclip wires that run down right hand side to motor etc…snip of cable ties underneath tub…
and then just hang top panel over left hand side of w/m…lift tub assy out > place doorseal side down >>remove connectors from motor/heater…
this can all be done without fill hoses etc removed….
saves a bit of time and not that complicated..although it does sound that way when your trying to write it down..
ally

[funkyboogy]

Re: Beko WMA1715S dead

had this recently, and ….
it was the pcb
cheers ally

[funkyboogy]

Re: Information freely given.

technical forum ?

[funkyboogy]

Re: THE THINGS CUSTOMERS SAY ?

kwatt customer said

kwatt wrote:“Hello, I need my cooker fixed and I’m on the insurance plan.”

what you mean your not going to call everyone in your area to find that customer ..
what kind of service are you giving
lol

[funkyboogy]

Re: THE THINGS CUSTOMERS SAY ?

or

dont look at the mess ; its my day of and im not cleaning….
yeh right looks like youve had a century off you clarty midden, as you somehow magicaly moonwalk over the stickyslidey floor…

no light working in kitchen and blinds havent been opened as they now longer work due to the grease thats built up on them..

next problem a space for your tool box, cos you know if you put it down it ill get stuck to the floor.

you are now rapidly searching the get me out of hear data banks
i mean how many plates etc can you not wash..

the smell is now kicking in, your trying not to look at the waste food mountain thats in and around the customary black bin liner in the corner..
but you have to look…some how this speeds up the excuse data base…

..excuse time >>>>>>>>>yes i know whats wrong with it very common problem so i dont need to pull it out,..unfortunatley i dont have the part in my van..
someone from the office will be in…..touch……………………..bye

ally

ally

[funkyboogy]

Re: THE THINGS CUSTOMERS SAY ?

martins post opens another can of worms ??
how do you tell the customer they have been using their appliance wrongly for the last 5 years, without insulting them…

classic scenario….warranty call, customer going of on one etc>>>>
you instantly notice the no spin has been selected,…but try telling this to the all knowing technicaly minded IT guru customer, without insulting them…or collecting another recall when they still insist its not working as it should be…
ps they have just bought a (merloni silver of course)

[Author]

Posts