[funkyboogy]

Re: hotpoint tdc32

float microswitch will be stuck on the up position,
remove rhs panel (mtr side)..microswitch siuated on other side of motor,
either push long screwdriver over to push switch down or if your hands are small sqeeze hand in…
this should cure prob…this prob occurs as a result of ir-regular checking of water …
cheers ally.

[funkyboogy]

Re: British Gas To Drop Appliance Servicing?

from my experience loads of delivery damage, and complaints of ovens not cooking properly…
customer >>i thought i was buying an aga..the saleperson said they came out the same factory>>>>
yeh right

ps lots of fan element/fan and t/stat failure…not really big jobs , depends on what the rates will be…
ally

[funkyboogy]

Re: British Gas To Drop Appliance Servicing?

B/G to part company with range – master,
(after sales warranty work)
wonder who will get that???

[funkyboogy]

Re: BOSCH WTA 2000 DRYER

i,ll have 2 please

[funkyboogy]

Re: BOSCH WTA 2000 DRYER

CHEERS DAVE
i think this one is fast turning into a non event,
unless ?
ally

[funkyboogy]

Re: BOSCH WTA 2000 DRYER

also need tripod unit thats attached to drum assy,
can you get this parts on its own, or is it a full drum job
cheers ally

[funkyboogy]

Re: Get your own back………

shouldnt your title be
get your cone back?

its the way i tell im

[funkyboogy]

Re: Van Livery

can you gives us aclue as to what the stickers say, b4 we part with cash,
… 💡 ❓ 💡 💡

[funkyboogy]

Re: any tips on fitting zanussi w/dry door seals?

no easy answer to problem apart from charging extra for the hassle.
i take door off, pull appliance forward and then tip back> this gives you much needed working access,once seal on>>use mole grips to secure retainer spring.
idea fold seal back at bottom >offer spring to bottom of seal then clamp with moles. thus allowing you two free hands to work spring into position..
cheers ally.

[funkyboogy]

Re: Off On One Again

excelent i think you should post in the public forms,
ps i was at a call the other day and the only time i could book a return visit was anytime after 5.30 on friday, as she was a nurse and seemingly this was the only time we could gain access..

pps you know what i told her dont you ??????..

[funkyboogy]

Re: Whos the Worst Trade Supplier You’ve Dealt With

everyone is falling over themselves to recomend a supplier, so i thought i get in early ???
i think its very much suck it and see,we have 2-3 local traditional suppliers who are vg for your run of the mill stuff and ocasionaly they supprise you with parts you didnt think they would have, for the specialist parts ie these high quality european/ chinese items you realy just have to shop around. time consuming,
you could also tap in the vast knowledge and experience of the UKW members who will almost undoubtly been there lots of times.ps ive emailed connect 6 times and called them once, still no application form…enough said
ally

[funkyboogy]

Re: siemens gas hob

cheers ,
i take this bar links all the control valves and tends to get abit sticky
ally

[funkyboogy]

Re: siemans cooker, need pt/no please.

hi martin ,
i cant find there tel no,
thats why i emailed them, person i spoke to didnt know much about spares account, but thought i woulndnt get one as i didnt sell app,s..

if you have tel no can you supply it cheers ally

[funkyboogy]

Re: BOSCH WTA 2000 DRYER

cheers ally,

[funkyboogy]

Re: siemens gas hob

not been to this yet ; its a freind of a freind etc, not over familiar with siemens hobs, but cant think of what else it might be..
ally

[Author]

Posts