Forum Replies Created
-
AuthorPosts
-
gadgetdad
ParticipantRe: RANGEMASTER TIMER – 13849-072
Its a twin relay timer –
http://www.espares.co.uk/part/cookers-and-hobs/leisure/p/1092/433/0/0/1331532/cooker-timer.html
as above – have connected the live/neutral to the bottom two inputs – the 4 relay outputs are to the left of the picture.
gadgetdad
ParticipantRe: Can anyone make me a website?
Hi, I can do you a website and get you in google pretty quickly by using google maps.
gadgetdad
ParticipantRe: LEISURE COOKMASTER CM101 NO SPARK
Hi guys, can confirm there is power from the output side of the clock, on the one connector but only when the ignition button is pressed. Does this seem right !!
Is there any way to test the ignition unit safely or is it just a swop out ?
An help much appreciated.
Gadgetdad
gadgetdad
ParticipantRe: BOSCH SGV43A03GB – AQUASTOP FAILED ?
Thanks for the answer guys – yep pressure chamber was gunged up – spot on.
cheers
gadgetdad
gadgetdad
ParticipantRe: LEISURE COOKMASTER CM101 NO SPARK
Hi Geoff, thanks for the info, will re-visit and check clock output – the ovens will light with a match – I do hear a “firing” sound but no spark is generated.
gadgetdad
gadgetdad
ParticipantRe: LEISURE COOKMASTER CM101 NO SPARK
Anybody !!!! please !!!
gadgetdad
ParticipantRe: BEKO DW450
Yeah I saw that, do you know how to test it or is it just a swop out ?
cheers
gadgetdad
gadgetdad
ParticipantRe: AEG LAVATHERM 3300W
Hi Martin – no its not the reverse motion thats the problem – I know they reverse – just seems to run in either direction when it feels like it. The timer is counting down as expected but the motor is just not turning. Have had the sides off and put a meter across the cap terminals and shows no voltage until the motor fires up.
Mitch
gadgetdad
ParticipantRe: Zanussi ZWD12270 ERROR
Yep, guilty as charged – didnt note that it was the dryer element that was probably suspect – will return with new dryer element next week 😳
Doesnt actually show an error code ! dont know how to enter diags on Zanussi machines – might it be in the “book of codes” available from here ?
Ta muchly
gadgetdad
ParticipantRe: Zanussi ZWD12270 ERROR
Hmmm – visited site – tried machine with heater disconnected – same error – tried new interlock – same error.
Machine takes in water for about 10 seconds then you hear the door click open and the pause/start light flashes green !!
Module ?? lots of money !!
Mitch
ps – didnt disconnect the dryer heater – might this give me the problem even at filling up stage ?
gadgetdad
ParticipantRe: Zanussi ZWD12270 ERROR
Thanks for that – will drop by there today – cheers.
Mitch
gadgetdad
ParticipantRe: Crusader 37667 condenser t/d
Thanks for the reply – no I did not – is it self-resetting ? because this is the type of error we have – blows cold, leave for a while, blows hot !!!
Mitch
-
AuthorPosts
